Klüber oil & grease lubricants

Klüber Summit FG 300

Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Application Klüber Summit FG 300

Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.

Special high-temperature oil for sliding chain systems in film stretchers made by Brückner Maschinenbau

Application Klüber Klübersynth CH 2-280

Klübersynth CH 2-280 is a fully synthetic high-temperature oil that was especially developed for the requirements of conveyor chain sliding systems and pins in biaxial high-speed film stretchers. Oven temperatures may be higher than 200 °C in these applications. The machine may run at speeds up to 450 m/min.

Klüber Summit FG 100

Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Application Klüber Summit FG 100

Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Summit Ultima 68

Synthetic air compressor oils for oil change intervals up to 12,000 operating hours

Application Klüber Summit Ultima 68

Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.

Klüber Klüberoil Y F 100

High-temperature chain oil

Application Klüber Klüberoil Y F 100

Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.

Klüber Summit LCG 68

Synthetic compressor oils for acidic and reactive gases such as landfill and biogases.

Application Klüber Summit LCG 68

The Klüber Summit LCG 68 was developed for application in screw-type compressors working with natural gases or the reactive and corrosive gases encountered in biogas plants, refineries, EOR processes or the chemical industry. Klüber Summit LCG 68 compressor oils do not contain sulphur or any other elements that might react with chlorine-containing components or acidic gases. They can also be used with gases containing chlorine where mineral oils, esters or polyglycols are not suitable for application. Klüber Summit LCG 68 compressor oils protect surfaces against the corrosive effects of acidic gases such as hydrogen sulphide or carbon dioxide. To select the right viscosity, the composition of the gas flow and all other operating conditions have to be known in detail

Klüber Unisilkon TK 017/200 Therm

High-temperature lubricating oils for rolling, plain and sintered metal bearings

Application Klüber Unisilkon TK 017/200 Therm

UNISILKON TK 017/200 THERM & UNISILKONTK 017/500 THERM are used for the lubrication of rolling and plain bearings as well as for the impregnation of porous sintered metal bearings and sintered formed parts. Other applications: Plastics and rubber industry: Separating agent for semifinished, finished parts. Preservative for elastomer materials to protect against brittleness and cracking. Textile industry: Start up oil for gear pumps used in synthetic filament extrusion. Precision engineering: Instrument and bearing oil. Heat technology: Heat transfer fluids.

Klüber Structovis BHD 75 S

Mineral oil-based special lubricants

Application Klüber Structovis BHD 75 S

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Klüber Klübersynth GEM 4-68 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Application Klüber Klübersynth GEM 4-68 N

Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

Klüber Summit FG 500

Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Application Klüber Summit FG 500

Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.

Klübersynth GEM 4-32 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Application Klübersynth GEM 4-32 N

Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

Klüber Summit NGSH 150

Synthetic gas compressor lubricants

Application Klüber Summit NGSH 150

Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.

Klüber Summit NGSH 100

Synthetic gas compressor lubricants

Application Klüber Summit NGSH 100

Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations

Klüber Summit DSL 32

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 32

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber ISOFLEX PDL 300 A

High-performance grease for rolling bearings operating at low temperatures

Application Klüber ISOFLEX PDL 300 A

ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.

Klüber Summit SH 46 XS

Synthetic air compressor oil enabling oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 46 XS

Klüber Summit SH 46 SX was especially developed for the lubrication of highly loaded rotary screw compressors which require an oil formulated without the use of silicone raw materials. Klüber Summit SH 46 XS is intended for oil-injected rotary screw compressors with oil change intervals of up to 10,000 operating hours. Used compressors can be switched over from conventional mineral oils to Klüber Summit SH 46 XS. Klüber Summit SH 46 XS is neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit SH 46 XS offers very good oxidation stability due to the synthetic base oil, thus minimising oxidation residues in the compressor and extending oil change intervals and the service life of the oil separator. The product contains special inhibitors to largely prevent the formation of residues in the compressors. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content in the compressed air.