Garia

Houghton Garia 601 M-22

It is based on hydro treated mineral oils with a low aromatic content.It's formulated to a combination of polar, extreme pressure and anti-wear additives.

Properties

Its composition gives the oil high load carrying properties. Its high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs.

The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air.

Due to its active sulphur content, the oil may discolor yellow metals.

Application

Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys. The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.

Houghton Garia 405 M-32

Garia 405 M-32 is a neat cutting oil. It is commonly used for machining higher alloyed steels, aluminum and magnesium alloys.

Properties

Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties.

Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys. It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.

Houghton Garia 603 S-15 

Neat Cutting Oil for Broaching and Severe Machining.

GARIA 603 S-15 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 603 S-15 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications:

GARIA 603 S-15 is a high performance product for severe operations as well as for difficult to machine materials.

GARIA 603 S-15 is designed for deep drilling with BT A. Ejector and gun drills. The oil has proven performance for severe broaching e.g. for internal broching of planetary gear rings.

Approved by Klingelnberg for Titanium grinding.

Houghton Garia SL 601

It is a cutting oil often used in micro screw feeders.

Properties

+ Chlorine free.

+ No aromatic components.

+ No oil mist .

+ Free of heavy metals.

+Very low power consumption.

+ Based on Synthetic esters.

+ High levels of anti-wear additives, EP -EN.

+ Biodegradable

Houghton Garia 601 M-12

Properties

GARIA 601 M-12 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces

Garia 601 M-12 and M-22 are neat cutting oils for machining of high alloy steels (stainless,heat resistant, austenitic, etc.) and aluminium ormagnesium alloys.

The oils show excellent results in working with many difficult operations like broaching, deep-hole drilling, tapping, shaping,and shaving of gears.

• Garia 601 M-12 and M-22 products are also very good grinding oils.
• Garia 601 M-12 and M-22 contain active sulphur - there is a risk of staining of yellow metals.
• Garia 601 M-12 and M22 are free of chlorine and heavy metals.

Approved by Kay's Engineering (Eldorado machines) for gun drilling.