Shell Panolin

Shell PANOLIN S5 Grease EAL V320 2

For use in environmentally sensitive areas, such as dredging and construction machinery

Main applications of Shell PANOLIN S5 Grease EAL V320 2 include:

• Grease for exposed applications such as pivot points and bearings
• Ideally suited for use in ecologically sensitive areas
• Compliant with EU Ecolabel and US EPA VGP standards

Shell PANOLIN S5 Grease EAL V320 2 is a biodegradable grease that delivers excellent performance from -30°C to 120°C. It offers high water resistance, strong adhesion, and excellent wear protection. Scroll down for full specifications and approvals.

Shell PANOLIN S2 Hydraulic DU EAL 46 Previously Naturelle S2 HF -E 46

For Environmentally Sensitive Areas including Marine, Civil Engineering and Offshore

Key applications of Shell PANOLIN S2 Hydraulic DU EAL 46 include:

• Biodegradable hydraulic fluid based on synthetic esters (HEES)
  
• For use in areas with increased environmental requirements such as US EPA VGP 2013
  
• Compatible with seals such as Viton® (FKM) and suitable as a replacement for mineral HLP/HVLP oils

Shell PANOLIN S2 Hydraulic DU EAL 46 provides excellent wear protection and system efficiency at temperatures up to 90°C. See all approvals and typical physical properties of Shell PANOLIN S2 Hydraulic DU EAL 46 at the bottom of this page.

Shell PANOLIN S2 Hydraulic EAL 32

For Hydraulic Systems in Environmentally Sensitive Areas

Key applications of Shell PANOLIN S2 Hydraulic EAL 32 include:

• Hydraulic systems in marine, offshore, and industrial sectors
• Applications in environmentally sensitive areas (such as U.S. waters)
• Suitable for systems where biodegradable oils are required

Shell PANOLIN S2 Hydraulic EAL is a biodegradable synthetic hydraulic oil of the HEES type. This oil meets the requirements of the EU Ecolabel and the US EPA Vessel General Permit. It offers excellent wear protection, is formulated ash-free, and contains on average 82% renewable components.

PANOLIN HLP SYNTH 15

Hydraulic fluid, readily biodegradable – saturated synthetic ester basis

Benefits of Panolin HLP Synth 15 are:

• Fully synthetic high-performance hydraulic fluid, zinc-free and environment-friendly, on synthetic ester basis with special additives
• Prevents gumming and deposits of ageing products, even at high temperatures
• Extremely long oil-change interval «lifetime filling»
• Reduces CO2 emissions
• Far greater reserve capacities than conventional hydraulic oils
• Outstanding high-pressure characteristics
• Excellent cold flow characteristics (extremely low pour point)
• Oxidation-resistant at high temperatures

PANOLIN HLP SYNTH 22

Hydraulic fluid, readily biodegradable – saturated synthetic ester basis

Benefits of Panolin HLP Synth 22 are:

• Fully synthetic high-performance hydraulic fluid, zinc-free and environment-friendly, on synthetic ester basis with special additives
• Prevents gumming and deposits of ageing products, even at high temperatures
• Extremely long oil-change interval «lifetime filling»
• Reduces CO2 emissions
• Far greater reserve capacities than conventional hydraulic oils
• Outstanding high-pressure characteristics
• Excellent cold flow characteristics (extremely low pour point)
• Oxidation-resistant at high temperatures

Shell PANOLIN S4 HLP Synth EAL 22 biodegradable

For hydraulic systems in environmentally sensitive areas

Key applications of Shell PANOLIN S4 HLP Synth EAL 22 include:

• Stationary and mobile hydraulic systems
• Used in marine, construction and forestry applications
• Suitable for use in ecologically sensitive zones

Shell PANOLIN S4 HLP Synth EAL 22 offers extended oil life and exceptional wear protection. It is readily biodegradable >60% according to OECD 301B and has low ecotoxicity. See the bottom of this page for all approvals of Shell PANOLIN S4 HLP Synth EAL 22.

Shell PANOLIN S4 Gear 100

Industrial gear oil - readily biodegradable, saturated synthetic esters

Application Shell PANOLIN S4 Gear 100

Shell PANOLIN S4 Gear is a synthetic fluid for use in gearing applications such as marine propulsion drives, thrusters and controllable pitch propellers, high-performance and readily biodegradable lubricant, based on saturated synthetic esters for industrial gear drives.

PANOLIN HLP SYNTH 32 

Hydraulic fluid, readily biodegradable – saturated synthetic ester basis

Benefits of Panolin HLP Synth 32 are:

• Fully synthetic high-performance hydraulic fluid, zinc-free and environment-friendly, on synthetic ester basis with special additives
• Prevents gumming and deposits of ageing products, even at high temperatures
• Extremely long oil-change interval «lifetime filling»
• Reduces CO2 emissions
• Far greater reserve capacities than conventional hydraulic oils
• Outstanding high-pressure characteristics
• Excellent cold flow characteristics (extremely low pour point)
• Oxidation-resistant at high temperatures

PANOLIN HLP SYNTH 46

Hydraulic Fluid, Light Biodegradable - Based on Saturated Synthetic Esters

Benefits of Panolin HLP Synth 46:

• Fully synthetic high-performance hydraulic fluid, zinc-free, and environmentally friendly, based on synthetic esters with special additives
• Prevents hardening and deposits, even at high temperatures
• Extremely long oil change intervals, "lifetime filling"
• Reduces CO2 emissions
• Clearly higher reserves than conventional hydraulic oils
• Excellent high-pressure properties
• Excellent performance in cold conditions (very low pour point)
• Oxidation-resistant at high temperatures

Shell PANOLIN S4 HLP Synth EAL 46

Hydraulic fluid – high-quality, readily biodegradable, saturated synthetic esters

Application of Shell PANOLIN S4 HLP Synth EAL 46

Shell PANOLIN S4 HLP Synth EAL is formulated with zinc-free additive technology and high-quality fully synthetic saturated esters to offer an excellent combination of lubrication performance and environmental acceptability. Readily biodegradable with low ecotoxicity, Shell PANOLIN S4 HLP Synth EAL hydraulic fluids are particularly suitable for use in environmentally sensitive areas where compliance with eco-label requirements is necessary, including U.S. waters. For use in stationary and mobile hydraulic systems, including marine and deck equipment, as well as construction and forestry machinery.

PANOLIN HLP SYNTH 68

Hydraulic Fluid, Light Biodegradable - Based on Saturated Synthetic Esters

Benefits of Panolin HLP Synth 68:

• Fully synthetic high-performance hydraulic fluid, zinc-free, and environmentally friendly, based on synthetic esters with special additives
• Prevents hardening and deposits, even at high temperatures
• Extremely long oil change intervals, "lifetime filling"
• Reduces CO2 emissions
• Clearly higher reserves than conventional hydraulic oils
• Excellent high-pressure properties
• Excellent performance in cold conditions (very low pour point)
• Oxidation-resistant at high temperatures

Shell PANOLIN S4 HLP Synth EAL 68

Hydraulic Fluid – high-performance, readily biodegradable, saturated synthetic esters

Application of Shell PANOLIN S4 HLP Synth EAL 68

Shell PANOLIN S4 HLP Synth EAL is formulated with zinc-free additive technology and high-quality fully saturated synthetic esters to provide an excellent combination of lubrication performance and environmental acceptability. Readily biodegradable with low ecotoxicity, Shell PANOLIN S4 HLP Synth EAL hydraulic fluids are particularly suitable for use in environmentally sensitive areas where eco-label compliance is required, including U.S. waters. Intended for use in both stationary and mobile hydraulic systems, including marine and deck equipment, construction, and forestry.

Shell PANOLIN S4 Gear 150

Industrial gear oil - readily biodegradable, saturated synthetic esters

Application Shell PANOLIN S4 Gear 150

Shell PANOLIN S4 Gear is a synthetic fluid for use in gearing applications such as marine propulsion drives, thrusters and controllable pitch propellers, high-performance and readily biodegradable lubricant, based on saturated synthetic esters for industrial gear drives.

Shell PANOLIN Biofluid SBH-N 10W-30 UTTO

For agricultural tractors & construction machinery in environmentally sensitive areas

Key applications of Shell PANOLIN Biofluid SBH-N 10W-30 include:

• Hydraulic systems, transmissions & wet brakes
• UTTO for universal use in tractors & construction equipment
• Readily biodegradable & low ecotoxicity

Shell PANOLIN Biofluid SBH-N reduces environmental impact in sensitive areas while offering excellent wear protection. Note: this product is not suitable for use as engine oil. See the bottom of this page for the typical analysis of Shell PANOLIN Biofluid SBH-N 10W-30.

Shell PANOLIN Biomot LX 10W-40 readily biodegradable

For Heavy-Duty Diesel Engines including Euro 4, 5 and 6

Key applications of Shell PANOLIN Biomot LX 10W-40 include:

• Heavy-duty diesel engines with low emissions (Euro 4, 5, 6)
• Applications in environmentally sensitive areas
• Where biodegradability and low ecotoxicity are required

Shell PANOLIN Biomot LX 10W-40 is more than 60% biodegradable after 28 days (OECD 301 B test) and tested as ‘non-toxic’ according to OECD/EPA standards. Suitable for use in areas with strict environmental requirements.

Shell Naturelle S4 Stern Tube Fluid 100

Special synthetic oil for environmentally friendly stern tube lubrication

Main application areas of Shell Naturelle S4 Stern Tube Fluid 100:

Shell Naturelle S4 Stern Tube Fluid 100 has been developed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid provides excellent lubrication performance, is readily biodegradable, and has low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP).

Shell PANOLIN VCP anti-corrosion lubricant

For gearboxes & hydraulic systems in sensitive environments

Key applications of Shell PANOLIN VCP include:

• Additive for hydraulic and gearbox oils
  
• Direct application via immersion, spraying or brushing
  
• Corrosion protection above the oil level, even in humid environments

Shell PANOLIN VCP is readily biodegradable and has low ecotoxicity. It protects metal components against corrosion, even above the oil level, making it ideal for marine applications or other ecologically sensitive areas.

PANOLIN HLP SYNTH 100

Hydraulic Fluid, Light Biodegradable - Based on Saturated Synthetic Esters

Benefits of Panolin HLP Synth 100:

• Fully synthetic high-performance hydraulic fluid, zinc-free, and environmentally friendly, based on synthetic esters with special additives
• Prevents hardening and deposits, even at high temperatures
• Extremely long oil change intervals, "lifetime filling"
• Reduces CO2 emissions
• Clearly higher reserves than conventional hydraulic oils
• Excellent high-pressure properties
• Excellent performance in cold conditions (very low pour point)
• Oxidation-resistant at high temperatures

Shell PANOLIN S4 Gear EAL 68

Industrial gear oil - readily biodegradable, saturated synthetic esters

Application Shell PANOLIN S4 Gear EAL 68

Shell PANOLIN S4 Gear EAL is an advanced synthetic fluid for use in gearing applications such as marine thrusters and propulsion drives. Industrial gears, bearings and other components in circulated and splash lubricated systems. Manufactured from fully saturated esters, Shell PANOLIN S4 Gear EAL is designed to offer outstanding load carrying performance whilst also being readily biodegradable with low ecotoxicity. Shell PANOLIN S4 gear EAL is an Environmentally Acceptable Lubricant (EAL) and holds the EU Ecolabel.