Klüber Tyreno
-
Klüber Tyreno Fluid E-95V
Quick orderingMore infoKlüber Tyreno Fluid E-95V
for low and fine vacuum applications
Application Klüber Tyreno Fluid E-95V
Working fluid for mechanical backing pumps extracting aggressive gases and vapours, but not oxygen or halogens. Universal oil offering a high viscosity index, excellent condensate separation and dispersing effect. Klüber Tyreno Fluid E-95V achieves a final pump pressure of approx. 10–2 mbar measured in a double-stage backing pump.
Show moreStarting at: € 71,51 / L -
Klüber Tyreno Fluid M-100V
Quick orderingMore infoKlüber Tyreno Fluid M-100V
for low and fine vacuum applications (mech. backing pumps)
Application Klüber Tyreno Fluid M-100V
Working fluid for universal application in oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. Klüber Tyreno Fluid M-100V achieves a final pump pressure of approx. 10–3 mbar measured in double-stage backing pumps.
Show moreStarting at: € 19,33 / L -
Klüber Tyreno Fluid WA-70V
Quick orderingMore infoKlüber Tyreno WA-70V
for low and fine vacuum applications (mech. backing pumps)
Application Klüber Tyreno Fluid WA-70V
General-purpose working fluid for oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. The product is very suitable for thin-layer processes, such as CVD/PVD etc. The final pump pressure of approx. 10–3 mbar measured in double-stage mechanical pumps.
Show moreStarting at: € 29,58 / L -
Klüber Tyreno Fluid 12/25 V
Quick orderingMore infoKlüber Tyreno Fluid 12/25V
High-performance vacuum pump oils for fine- and high-vacuum applications
Application Klüber Tyreno Fluid 12/25V
Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.
Show moreStarting at: € 635,33 -
Klüber Tyreno Fluid 6/14V
Quick orderingMore infoKlüber Tyreno Fluid 6/14V
High-performance vacuum pump oils for fine- and high-vacuum applications
Application Klüber Tyreno Fluid 6/14V
Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.
Show moreStarting at: € 635,33 -
Klüber Tyreno Fluid 3/6V
Quick orderingMore infoKlüber Tyreno Fluid 3/6V
High-performance vacuum pump oils for fine- and high-vacuum applications
Application Klüber Tyreno Fluid 3/6V
Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.
Show moreStarting at: € 1 314,02 / L -
Klüber Tyreno Fluid M-60VD
Quick orderingMore infoKlüber Tyreno Fluid M-60VD
For high vacuum applications
Application Klüber Tyreno Fluid M-60VD
Working fluid for all types of diffusion pumps. It ensures high pump speeds and a very low ultimate pressure (up to 2 · 10–9 mbar with N2 cold trap).
Show more€ 171,28 / L
Our customers value us
Ian Adair
"We like your site, it shows that you are experts in lubricants!"
Cris Scullion
"You deliver quicker than our previous UK supplier!"
Stuart Wyatt
"Surprise to us!
We paid to much in the past"
Our customers value us
Ian Adair
"We like your site, it shows that you are experts in lubricants!"
Cris Scullion
"You deliver quicker than our previous UK supplier!"
Stuart Wyatt
"Surprise to us!
We paid to much in the past"
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.