Klüber oil & grease lubricants

Klüber Klübersynth GHE 6-100

Synthetic gear and circulating oils

Application Klüber Klübersynth GHE 6-100

Klübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears. Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplings.

Klüber PETAMO GY 193

Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings

Application Klüber PETAMO GY 193

Depending on the service temperature, PETAMO GY 193 can be used for lifetime lubrication or relubrication. Experience has shown that lifetime lubrication is possible with temperatures below 150°C, for example in electric motors, fans, carrier and guide rollers, chain wheels, sealed or capped rolling bearings. In relubricatable rolling bearings subject to very high temperatures the grease can be used up to 180°C (e.g. in driers). PETAMO GY 193 should be selected primarily for lubrication of bearings with point contact loading, but can also be used for bearings with linear contact loading and a high share of sliding friction, e.g. cylindrical roller bearings or tapered roller bearings.

Klüber TABURAGS NBU 12 Altemp

Lubricating grease for plain and rolling bearings

Application Klüber TABURAGS NBU 12 Altemp

STABURAGS NBU 12 ALTEMP is used as a grease for rolling and plain bearings and for assembly purposes. It is suitable for slideways, threaded spindles, bearing seats and clamping chucks.

Klüber Tex Syntheso M 22

Needle and sinker oils providing good wear protection

Application Klüber Tex Syntheso M 22

TEX SYNTHESO M oils meet the requirements of modern mechanical knitting machines running under different operating conditions. The oils are scourable with conventional washing liquors. TEX SYNTHESO oils lubricate and clean the stitchforming elements like needles, sinkers, needle cams, needle cylinders, dials and sinker rings of knitting machines. Owing to the special product formulation and the additives used, these components are kept clean, thus contributing to a smooth operation of the machines. TEX SYNTHESO M oils can be used for flat-bed and circular knitting machines and are available in different viscosity grades. When selecting the viscosity please observe the machine manufacturer's recommendations.

Klüber STABURAGS NBU 30

Lubricating grease with high resistance to ambient media

Application Klüber STABURAGS NBU 30

STABURAGS NBU 30 has been especially designed for use as sealing grease, for valves and fittings as well as for the lubrication of low-speed rolling and plain bearings subject to humidity, water vapour and aggressive media. Typical applications include bearings in conveyors (load rollers in wet areas), in textile machines for wet processing (festoon steamers, washing machines), and bearings of machines in the food-processing industry. STABURAGS NBU 30 is NSF H2 registered.

Klüber VARILUB NBU 15/300

Spindle bearing grease

Application Klüber VARILUB NBU 15/300

VARILUB NBU 15/300 has been especially developed for highspeed rolling and plain bearings, e.g. tool and textile spindle bearings, threaded spindles, ball screws subject to high loads, chassis bearings. It can also be used as long-term grease for bearings in cableways and precision engineering, or for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves).

Klüber CONSTANT GLY 2100

Synthetic impregnating fluid for sintered metal plain bearings

Application Klüber CONSTANT GLY 2100

CONSTANT GLY 2100 is intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

UNISILKON F GLK 112

Special lubricating grease for Bowden cables, seals and plastics

Application UNISILKON F GLK 112

UNISILKON F GLK 112 is primarily used for the lubrication of rubber-metal, plastic-metal or plastic-plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables and belt tensioners. In such applications, UNISILKON F GLK 112 reduces friction, thus preventing annoying squeaking noise.

Klüber Klüberpress HF 2-102

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-102

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klübertec ST 4-701

Stamping and forming fluid

Application Klüber Klübertec ST 4-701

• Blanking & drawing of steel and non-ferrous sheet metal between 0.2 and 2.5 mm thick
• Rolling, deep drawing, edging and folding, e.g. in the manufacture of drum lids
• Preserving steel components, e.g. brake parts
• Corrosion protection of assembly components

Klüber Klübertec CM 2-004

Metalworking oil registered as NSF H1

Application Klüber Klübertec CM 2-004

Basic uses of Klübertec CM 2-004 are in simple metalworking processes – e.g. punching or light forming processes – where a product registered as NSF-H1 is required. Typical examples of use are: Deep-drawing of aluminium foil packages for the foodprocessing or pharmaceutical industries, cans, crown caps and other bottle caps; Light forming, e.g. edging of thin or very thin steel or other sheet metal containers for food or pharmaceutical products; Punching of thin or very thin aluminium or steel sheets for subsequent processing

Klüber Structovis EHD

Mineral oil-based special lubricants

Application Klüber Structovis EHD

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Klüber Klübersynth H2 C 2-260

High-temperature chain oil for spiral ovens

Application Klüber Klübersynth H2 C 2-260

Klübersynth H2 C 2-260 is intended for use on chains exposed to high temperatures in spiral ovens used in bread/bun baking as well as meat/poultry cooking. These chains are exposed to sliding and rolling friction typically prevailing in traditional roller and skate chains and their guide rails. Klübersynth H2 C 2-260 is used for a sustained temperature of 250 °C while still providing a sufficient lubricating film for the rollers, balls, pins and rails.

Klüber Wolfraco WF 51 W

Pigment-free, water-miscible release agent for hot forming of nonferrous metals

Application Klüber Wolfraco WF 51 W

WOLFRACO WF 51 W is used for hollow and solid pressing of copper alloys, mixing ratio 1:1 to 1:8, and for hot forming of aluminum, mixing ratio 1:1 to 1:12, as well as for pressure diecasting applications, e.g.  valves and fittings (brass); synchronization rings with internal and external gears (brass); wheel suspensions, suspension arms (aluminum); small garnishes for the furniture industry (brass and aluminum) WOLFACO WF 51 W reduces friction between the die and the formed part even at die temperatures above 300°C. The lubricant film improves the material flowing properties particularly under extreme conditions ensuring the formation of a smooth material surface finish.

Klüber Summit HySyn FG 100

Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Application Klüber Summit HySyn FG 100

Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.

Klüber Madol 172 Supreme

Needle and sinker oils for hosiery and flat-bed knitting machinery

Application Klüber Madol 172 Supreme

Klüber Madol 100 Supreme oils lubricate needles, sinkers, couplings, needle cams, cylinders and cylinder bearings of hosiery and flat-bed knitting machines. Klüber Madol 100 Supreme oils are available in the viscosity grades ISO VG 22, 32 and 46 and can therefore be used for hosiery and flat-bed knitting machines. Please observe the machine manufacturer's viscosity recommendations. The oils are tested and approved by leading knitting machine manufacturers.

Klüber Klübersynth BM 44-42

Special grease for actuators, rolling bearings and free-wheels

Application Klüber Klübersynth BM 44-42

Klübersynth BM 44-42 is mostly used for the long-term lubrication of actuators and rolling bearings in automotive applications. It was also developed for low-wear idling operation and reliable indexing of free-wheels and override clutches. Klübersynth BM 44-42 shows good adhesion to the lubrication point, improving long-term lubrication especially in uncapped bearings or rotating outer rings.

Klüber Unisilkon L 250 L

Special lubricating grease for drinking water, beverage and heating valves and fittings

Application Klüber Unisilkon L 250 L

UNISILKON L 250 L is used as lubricating and sealing grease for – domestic valves & fittings for drinking water, (e.g. ceramic discs and piston cartouches, thermo regulators). As the lubricant’s viscosity is rather independent of service temperatures, UNISILKON L 250 L allows constant actuating forces within the whole cold/hot water range of e.g. single-lever mixer taps. – valves and fittings of heating installations (e.g. thermoregulators, tap cocks, pressfit seals) UNISILKON L 250 L has also proven effective as assembly aid for radial shaft seals and packings in contact with cold or hot water and steam.

Klübersynth GH 6-100

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-100

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains