Klüber oil & grease lubricants

Klüber LAMORA D 68

Lubricating oils for slideways and guideways

Application Klüber LAMORA D 68

LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.

Klüber Klüberpaste HEL 46-450

High-temperature screw paste

Application Klüber Klüberpaste HEL 46-450

Screw paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C. Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems). For connecting elements in turbochargers and compressors. The test was performed acc. to VW-TL 52112 Bolt: DIN 931-2; Material:1.4989; Nut, material: 1.4923. The nuts were preloaded with 70 Nm and stored at 750 °C for 100 hours. After this period a low release torque was measured.

Klüber ISOFLEX TOPAS NB 5051

Synthetic long-term grease

Application Klüber ISOFLEX TOPAS NB 5051

ISOFLEX TOPAS NB 5051 is used for plain and rolling bearings (e.g. in automotive engineering) and for gas meters. It is also used in small gears, where it reduces the noise produced by the gear wheels. ISOFLEX TOPAS NB 5051 is also suitable for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves). Its good adhesion on smooth surfaces makes it ideal for the running-in lubrication (assembly) of plastic and composite bearings.

Klüber Klüberpress HF 2-101

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-101

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klübertec ST 4-702

Stamping and forming fluid with residue-free evaporation

Application Klüber Klübertec ST 4-702

• Stamping and forming of metal sheets of all types, e.g. for electric motors and components; sheet thickness up to 2.5 mm
• Easy to medium forming processes, especially if there are no additional cleaning steps
• Stamping and fine blanking of metals, such as aluminium and aluminium alloys; non-ferrous metals; steels
• Drawing, rolling, edging and folding of e.g. drums and drum lids

Klüber Klüberpress HF 2-103

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-103

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber BARRIERTA L 55/2

High-temperature long-term greases

Application Klüber BARRIERTA L 55/2

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include:

• conveyors (load and turn rollers)
• kiln cart wheel bearings
• calender bearings
• fan bearings
• chain bearings in film stretching stenters

Klüber Klüberpress HF 2-104

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-104

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klübersynth GHE 6-100

Synthetic gear and circulating oils

Application Klüber Klübersynth GHE 6-100

Klübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears. Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplings.

Klüber STABURAGS NBU 30

Lubricating grease with high resistance to ambient media

Application Klüber STABURAGS NBU 30

STABURAGS NBU 30 has been especially designed for use as sealing grease, for valves and fittings as well as for the lubrication of low-speed rolling and plain bearings subject to humidity, water vapour and aggressive media. Typical applications include bearings in conveyors (load rollers in wet areas), in textile machines for wet processing (festoon steamers, washing machines), and bearings of machines in the food-processing industry. STABURAGS NBU 30 is NSF H2 registered.

Klüber Tyreno WA-70V

for low and fine vacuum applications (mech. backing pumps)

Application Klüber Tyreno Fluid WA-70V

General-purpose working fluid for oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. The product is very suitable for thin-layer processes, such as CVD/PVD etc. The final pump pressure of approx. 10–3 mbar measured in double-stage mechanical pumps.

Klüber Klüberpress HF 2-102

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-102

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber CONSTANT GLY 2100

Synthetic impregnating fluid for sintered metal plain bearings

Application Klüber CONSTANT GLY 2100

CONSTANT GLY 2100 is intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Madol 172 Supreme

Needle and sinker oils for hosiery and flat-bed knitting machinery

Application Klüber Madol 172 Supreme

Klüber Madol 100 Supreme oils lubricate needles, sinkers, couplings, needle cams, cylinders and cylinder bearings of hosiery and flat-bed knitting machines. Klüber Madol 100 Supreme oils are available in the viscosity grades ISO VG 22, 32 and 46 and can therefore be used for hosiery and flat-bed knitting machines. Please observe the machine manufacturer's viscosity recommendations. The oils are tested and approved by leading knitting machine manufacturers.

Klüber Klübersynth GE 46-1200

Synthetic long-term fluid grease with excellent anticorrosive effect

Application Klüber Klübersynth GE 46-1200

We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears. Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics. Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C. It may even be applied at extreme temperatures down to -50 °C since Klübersynth GE 46-1200 will build up a load-carrying lubricant film at these low temperature conditions.

Klüber Klübertec ST 4-701

Stamping and forming fluid

Application Klüber Klübertec ST 4-701

• Blanking & drawing of steel and non-ferrous sheet metal between 0.2 and 2.5 mm thick
• Rolling, deep drawing, edging and folding, e.g. in the manufacture of drum lids
• Preserving steel components, e.g. brake parts
• Corrosion protection of assembly components

Klüber Madol 162 Supreme

Needle and sinker oils for hosiery and flat-bed knitting machinery

Application Klüber Madol 162 Supreme

Klüber Madol 100 Supreme oils lubricate needles, sinkers, couplings, needle cams, cylinders and cylinder bearings of hosiery and flat-bed knitting machines. Klüber Madol 100 Supreme oils are available in the viscosity grades ISO VG 22, 32 and 46 and can therefore be used for hosiery and flat-bed knitting machines. Please observe the machine manufacturer's viscosity recommendations. The oils are tested and approved by leading knitting machine manufacturers.

Klüber VARILUB NBU 15/300

Spindle bearing grease

Application Klüber VARILUB NBU 15/300

VARILUB NBU 15/300 has been especially developed for highspeed rolling and plain bearings, e.g. tool and textile spindle bearings, threaded spindles, ball screws subject to high loads, chassis bearings. It can also be used as long-term grease for bearings in cableways and precision engineering, or for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves).

Klüber Klübertec CM 2-004

Metalworking oil registered as NSF H1

Application Klüber Klübertec CM 2-004

Basic uses of Klübertec CM 2-004 are in simple metalworking processes – e.g. punching or light forming processes – where a product registered as NSF-H1 is required. Typical examples of use are: Deep-drawing of aluminium foil packages for the foodprocessing or pharmaceutical industries, cans, crown caps and other bottle caps; Light forming, e.g. edging of thin or very thin steel or other sheet metal containers for food or pharmaceutical products; Punching of thin or very thin aluminium or steel sheets for subsequent processing