Lubricants

BARRIERTA KM 192

High-temperature and long-term lubricants with good resistance to low temperatures

Application BARRIERTA KM 192

Rolling bearings and guideways BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads. Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond. BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering. Valves and seals The BARRIERTA K greases good temperature resistance and their compatibility with plastics and elastomers – which is typical of PFPE lubricants – make them highly suitable for the lubrication of engine valves and seals as are found in hydraulic cylinders. BARRIERTA K greases enable long runtimes with low noise generation and low friction coefficients. The resistance of BARRIERTA KM 192 against brake fluids, type DOT 3, 4, 5 and 5.1, has been confirmed in an individual test. Compatibility with elastomers and plastics BARRIERTA K grease stand out for their neutral behaviour towards elastomers and plastics. Owing to the many different varieties of elastomers and plastics and varying operating conditions, we recommend checking their compatibility with the component material prior to series application.

Mobil Grease XHP 462

Grease

Application Mobil Grease XHP 462

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles. Specific applications: Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings. Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

CASTROL CareCut ES 3

High performance neat cutting oil

Application CASTROL CareCut ES 3

CareCut ES 3 is designed for severe honing and superfinishing of ferrous and non ferrous materials. It can also be used for grinding applications, drilling and general machining of aluminium, yellow metals, cast iron and medium alloyed steel. CareCut ES 3 can also be used for hard metal as well as tool grinding. CareCut ES 3 does not contain active sulphur and is hence compatible with yellow metals

Shell DCT-M1

Application Shell DCT-M1

Shell DCT-M1 has been developed as an initial-fill and service-fill fluid for use in 7-speed dual clutch transmissions (7G-DCT) used in the latest generation of Mercedes-Benz Aand B-Class passenger cars (models W176 & W246).

Shell Gas Compressor Oil S4 RN 68 previously Shell Madrela GP

Advanced Synthetic Gas Compressor Oil

Application Shell Gas Compressor Oil S4 RN 68

Rotary screw gas compressors. Shell Gas Compressor Oil S4 RN is suitable for shaft and rotor lubrication of rotary screw compressors used for low pressure compression of natural gas.

LPG bottling. Shell Gas Compressor Oil S4 RN is suitable for use in rotary screw compressors used for bottling LPG up to 40 bar pressure

LPG and LNG vehicle fuelling. Suitable for use in compressors handling natural and petroleum gas for vehicle fueling applications

Multiple gas transportation vessels. Shell Gas Compressor Oil S4 RN is suitable for compressing a wide variety of hydrocarbon gases. When used in marine cargo compressors, there is no need to change lubricant with a change in gas being transported

Shell Fire-Resistant Hydraulic Fluid S3 DU 46

Fire Resistant (HFDU) and Readily Biodegradable Hydraulic Fluid

Application Shell Fire-Resistant Hydraulic Fluid S3 DU 46

Hydraulic fluid. Shell Fire-Resistant Hydraulic Fluid S3 DU 46 can be used as the hydraulic fluid in industrial and mobile equipment, including high-pressure systems, hydrostatic drives, systems with servo valves, and robotics.

Klüber Tyreno Fluid 3/6V

High-performance vacuum pump oils for fine- and high-vacuum applications

Application Klüber Tyreno Fluid 3/6V

Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.

Shell Omala S4 GXV 680

Advanced Synthetic Industrial Gear Oil

Application Shell Omala S4 GXV 680

Drive systems and other inaccessible installations. Shell Omala S4 GXV 680 is excellent for installations that require an extra long oil bath life and/or where irregular maintenance occurs due to difficult accessibility of the installation. Excellent compatibility with elastomers, paints and sealants. Compatible with a wide range of seals used in industrial systems, e.g. nitrile rubber and fluoroelastomers. Homologated against the stringent Siemens requirements for Flender gears and geared motors. Industrial gearing with closed sump Recommended for industrial gearing under severe operating conditions such as high peak or shock loading and/or low, high or highly fluctuating oil bath temperatures. Other Applications Shell Omala S4 GXV 680 can be used for the lubrication of bearings and other components in systems with circulation or oil splash lubrication. For the lubrication of heavily loaded worm gears, the use of Shell Omala "W" lubricating oils is recommended. For hypoid transmissions in vehicles, the use of suitable Shell Spirax is recommended.

Shell Gadus S3 V460D 1.5 Previous Name: Retinax SDX & Albida HDX 2

Premium multi-purpose heavy duty grease with solids

Shell Gadus S3 V460D 1.5 main applications:

• Shell Gadus S3 V460D greases are used for the grease lubrication of heavy duty, slow-moving bearings subject to shock loads found in the following industries:
• Mining
• Steel
   

Shell Gadus S3 V460D 1.5 greases are high performance, high temperature greases for slow-moving, heavily loaded large bearings subject to shock loads. They are based on high viscosity index mineral oil and a lithium complex soap thickener. Apart from containing the latest additives to ensure excellent high temperature, anti-corrosion and antioxidation performance, they also contain MoS2 to ensure the grease can handle shock loads.

Please note!! Price of Shell Gadus S3 V460D 1.5 drops automatically in larger quantities.

Shell PANOLIN S4 HLP Synth EAL 46

Hydraulic fluid – high-quality, readily biodegradable, saturated synthetic esters

Application of Shell PANOLIN S4 HLP Synth EAL 46

Shell PANOLIN S4 HLP Synth EAL is formulated with zinc-free additive technology and high-quality fully synthetic saturated esters to offer an excellent combination of lubrication performance and environmental acceptability. Readily biodegradable with low ecotoxicity, Shell PANOLIN S4 HLP Synth EAL hydraulic fluids are particularly suitable for use in environmentally sensitive areas where compliance with eco-label requirements is necessary, including U.S. waters. For use in stationary and mobile hydraulic systems, including marine and deck equipment, as well as construction and forestry machinery.

TOTAL CARTER EP 460 previous Carter SY 460

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 460

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 460 drops automatically in larger quantities.

Shell Gadus S3 T460 1.5 Previous Name: Stamina Grease 0511

Premium Performance High-Temperature Extreme Pressure Grease

Shell Gadus S3 T460 1.5 main applications:

• Shell Gadus S3 T460 Grease was formulated specifically for the lubrication of high temperature, slow-moving concast bearings in the steel industry. 
• It can also be used in other high temperature, slow-moving bearing, applications. 
• Field experiences have demonstrated the benefits of Gadus S3 T460 Grease, achieving lower maintenance costs ie less bearing replacement and less maintenance of centralized lubrication systems.

Shell Gadus S3 V460 Greases are especially suitable for slow moving, heavy-duty bearings operating at high temperature and under severe load. eg Steel (continuous casters, workroll bearings), Cement, Paper, Chemical Industry, Mining.

Please note!! Price of Shell Gadus S3 T460 1.5 drops automatically in larger quantities.

Plantoflux 46 AT-S

Synthetic fire-resistant hydraulic fluids based on organic esters, type HFDU

Plantoflux 46 AT-S field of applications:

PLANTOFLUX-AT-S are primarily used as fire resis-tant hydraulic fluids in machines or plants operating in hazardous conditions, i.e. where naked flames or high temperatures arepresent and the fire riskcaused by the fluid leakage is high, most notably: steel mills, blast furnaces, continuous casting ma-chine, coke plants, etc.PLANTOFLUX-AT-S are generally applicable in any hydraulic systems where environmental protection and biodegradability are a priority.

Please note!! Price of Plantoflux 46 AT-S drops automatically in larger quantities.

Mobil Pyrotec HFC 46

Fire-Resistant Hydraulic Fluid

Application Mobil Pyrotec HFC 46

Mobil Pyrotec HFC 46 is recommended for use in: Hydraulic systems utilizing vane, gear and piston hydraulic pumps. Hydraulic and oil circulation systems operating in conditions subject to fire hazards

Shell Naturelle S2 Hydraulic Fluid 68 previously Shell Naturelle HF-E 68

Fully synthetic, environmentally friendly biodegradable and low-flammable hydraulic oil

Main uses of Shell Naturelle S2 HF 68 are:

• + Mobile /hydraulic applications outside
• + General industrial control systems and hydraulics
• + Ecologically sensitive areas, with Ecolabel
  
  

Shell Naturelle S2 68 Hydraulic Fluid is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. It is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries. Fully synthetic esters, blended with ashless additives, provide Shell Naturelle S2 HF 68 with a superior blend of lubrication performance and environmental acceptability.

Mobil Centaur XHP 221

Multipurpose Calcium Sulphonate Complex Grease

Application Mobil Centaur XHP 221

Mobil Centaur XHP 221 is recommended for lubrication of rolling element bearings in machinery operating at high temperatures where resistance to water washing and corrosion are important. Specific examples of such applications include : Wet-end paper machine bearings. Heavily loaded industrial ball and roller bearings. Bearings in steel mill and mining operations.

Shell Refrigeration Oil S4 FR-F 100

Advanced Synthetic Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S4 FR-F 100

Refrigerator Compressors Shell Refrigeration Oil S4 FR-F is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Refrigerant Compatibility Shell Refrigeration Oil S4 FR-F is recommended for use with R134a and other types of HFC refrigerant.Seal Compability Shell Refrigeration Oil S4 FR-F is compatible with all sealing materials commonly used with HFC refrigerant systems.

Aeroshell Oil W120

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W120

AeroShell W Oils are available in three different viscosity grades: AeroShell Oil W80 - AeroShell Oil W100 - AeroShell Oil W120. The suffix for each grade corresponds to the viscosity of the oil at 2100 F in Saybolt Universal Seconds. AeroShell W Oils are intended for use in four-stroke (fourcycle) certified reciprocating piston engines, including fuelinjected and turbocharged engines. AeroShell W Oils are not recommended for use in automotive engines. For automotive engines converted for use in aircraft, the specific engine manufacturer or the conversion agency should be consulted for proper oil recommendation. Most radial engine operators use AeroShell Oil W120 in warm weather operations with AeroShell Oil W100 or AeroShell Oil W 15W-50 being used in cooler ambient temperatures. AeroShell Oil W100 or AeroShell Oil W 15W-50 are the common choices for most operators of Lycoming and Continental flat engines but, during colder parts of the year, use of AeroShell Oil W80 in place of AeroShell Oil W100 would be an excellent choice. Although some aircraft engine manufacturers and rebuilders/ overhaul agencies suggest in their service bulletins the use of a straight mineral oil in new or newly overhauled engines, other rebuilders or manufacturers, especially for engines such as the Lycoming O-320H and O/LO360E, allow either ashless dispersant or straight mineral oil for break-in, whereas ashless dispersant oils are mandated for break-in for all turbocharged Lycoming engines. Operators should check with engine manufacturers or rebuilders for the correct recommendation for the specific engine and application.

Total Carter BIO 220

High performance Biodegradable lubricant for enclosed industrial gearboxes

Applications Total Carter BIO 220

• CARTER BIO is a new generation high performance biodegradable lubricant developed for industrial gears and bearing lubrication.
• CARTER BIO is designed to replace mineral gear oils for gearboxes operating in environmentally sensitive areas.

CASTROL Radicool SF

Antifreeze Coolant

Application CASTROL Radicool SF

The special inhibitor package used in Castrol Radicool SF enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF provides excellent protection against cavitation corrosion and effective water pump lubrication , reducing wear and noise. The additive technology used in Castrol Radicool SF prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF is approved by a number of OEM's including Merceded Benz, Volkswagon, MAN and Ford. It is also recommended against the following vehicle manufacturer's specifications ; General Motors GM 6277M, Deutz , Cummins IS series and N14 engines, Jenbacher, Komatsu, Renault Type D, Jaguar CMR 8229 and MTU MTL 5048 Series 2000C&I. Castrol Radicool SF contains a bittering agent to deter from accidental ingestion