Lubricants

Spirax S3 AS 80W-140 Previous Name: Shell Spirax ST 80W-140

High performance, GL-5 axle oil for Scania

Spirax S3 AS 80W-140 main applications:

• Automotive transmissions

Shell Spirax S3 AS 80W-140 is designed for use in a wide variety of automotive axle units subjected to heavy duty conditions. The use of high performance additive systems and selected base oils allows extended oil drain capability in some applications. In addition, Spirax S3 AS 80W-140 may be used in non-synchronised heavy duty gearboxes and certain synchronised heavy duty gearboxes where oils meeting API GL-5 or MT-1 are specified.

Please note!! Price of Spirax S3 AS 80W-140 drops automatically in larger quantities.

Q8 Axle Oil XG 80W-140

Synthetic SAE J2360 axle fluid

Applications Q8 Axle Oil XG 80W-140

Q8 Axle Oil XG 80W-140 is recommended for use in rear axles and final drive applications and is approved by Scania to use with extended drain intervals up to 180,000km. It meets the requirements of SAE J2360, top European OEMs and component manufacturers such as ZF.

Your advantage! Price of Q8 Axle Oil XG 80W-140 drops automatically in larger quantities.

Shell Caprinus XR 40

Railroad Diesel Engine Oil

Application Shell Caprinus XR 40

North American diesel engines subjected to the most arduous duty where 'zinc-free' oils are recommended by the engine manufacturer. Applications are primarily for railroad locomotives, however Caprinus XR 40 may also be suitable for certain engines in power generation, marine and mine-haul applications.

Klüber BARRIERTA L 55/1

High-temperature long-term greases

Application Klüber BARRIERTA L 55/1

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

Shell Tellus S4 VE 46

Advanced Synthetic Shear Stable Hydraulic Oil

Shell Tellus S4 VE 46 main applications:

• Mobile hydraulic systems
• Industrial hydraulic systems
• Wind Turbines
• Marine Hydraulic Systems
• Premium Wear Protection
• Sub-arctic to extreme desert heat operations

Shell Tellus S4 VE hydraulic fluids are based on Gas-to-liquid (GTL) technology and are designed for a broad range of stationary and mobile applications, with their extra-long oil life, wide operating temperature window, impactful energy efficiency, and robust equipment protection. Shell Tellus S4 VE enables customers to realise potential cost savings through longer equipment service life and lower maintenance costs.

Please note!! Price of Shell Tellus S4 VE 46 drops automatically in larger quantities.

Shell Tellus S4 ME 46 Previous name: Shell Tellus EE

Energy efficient high-performance hydraulic oil

Benefits of the Tellus S4 ME 46 are:

• + Long oil change intervals and protection
• + Energy Efficiency

Shell Tellus S4 ME 46 has been specially designed to help reduce the energy and operating costs of hydraulic systems while maintaining good protection of the hydraulic system.
Shell Tellus S4 ME 46 has a significant improvement in energy efficiency in many applications such as injection moulding machines, metal presses and mining conveyors.
In addition, Shell Tellus S4 ME 46 has very good wear protection and long oil life, which can extend oil change intervals and reduce maintenance costs.

Klüber Klüberfood NH1 CH 2-150

High-temperature chain oils for the food and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 2-150

The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry

Mobil Delvac XHP Ultra LE 5W30 New name Mobil Delvac Modern 5W-30 Advanced Protection V6

Advanced Engine and Emission System Protection

Application Mobil Delvac XHP Ultra LE 5W30

Recommended by ExxonMobil for use in: Latest generation MB trucks and buses requiring MB-Approval 228.51 lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MB-Approval 228.5 are recommended (please always refer to MB-Sheet 223.2 and to the owner's manual of the respective vehicle). Latest generation of MAN trucks and buses requiring MAN M 3677 approved lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MAN M 3277 & M 3275-1 are recommended (please always refer to the owner's manual of the respective vehicle). On-highway light and heavy-duty trucking. Modern heavy-duty engines equipped with Diesel Particulate Filter (DPF) in line with owner manual recommendations

Fuchs Renolin EP 220, previously RENOLIN CLP 220

Heavy duty - EP 220 - industrial gear oils of highest performance, outstanding extreme pressure characteristics and load carrying capacity

Renolin EP 220 field of applications:

The RENOLIN EP 220 oils are recommended for industrial spur-, helical- and bevel enclosed gears with circulation or splash lubrication, operating at oil temperatures up to 100ºC and peaks above (up to 120ºC).

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.

RENISO C170E

Refrigeration oils for CO2 compressors

RENISO C170E field of applications:

The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.

Please note!! Price of RENISO C170E drops automatically in larger quantities.

TOTAL FINATUROL D

Very high performance vegetable oil for dough dividers and bread slicers

Applications TOTAL FINATUROL D

• FINATUROL D has been developed to ensure optimum performances of lubrication and to give maximum wear protection to the knives with an oil consumption as low as possible.
• FINATUROL D is used to prevent sticking and the development of varnishes on the surface of the knives.

View product data of Total Finaturol K 2

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Mobil DTE PM Excel 150

Paper Machine Lubricant

Application Mobil DTE PM Excel 150

Lubrication of the wet end, press section, calender applications and dry end, including in Voith and Metso (Valmet) paper machines. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Gadus S2 V145KP 2 Previous Name: Retinax Grease EPL 2

High Performance multi-purpose low-temperature extreme pressure grease

Shell Gadus S2 V145KP 2 main applications:

• Passenger car, light & heavy truck wheel bearings & chassis. Shell Gadus S2 V145KP is especially suitable for cold climates (improved low-temperature performance).
   

Please note!! Price of Shell Gadus S2 V145KP 2 drops automatically in larger quantities.

Shell Turbo S4 X 32 

Premium based industrial steam, gas and combined cycle turbine lubricant

Shell Turbo S4 X 32 main applications:

• Power and industrial steam, gas & combined cycle turbines Shell Turbo S4 X 32 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines.
• Note that some applications with highly loaded gearboxes require a lubricant with enhanced anti-wear performance - for these applications use Shell Turbo S4 GX.
• Further industrial applications
  Shell Turbo S4 X 32 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors.

Shell Turbo S4 X 32 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance under the most severe operating conditions Shell Turbo S4 X 32 will minimise deposit and sludge formation even under cyclic peak loading conditions.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

TITAN ATF 4134

Ultra high-performance ATF, specially developed to optimise shifting performance of Mercedes-Benz automatic transmissions

TITAN ATF 4134 field of applications:

TITAN ATF 4134 is a factory filled in the latest generation of Mercedes Benz (NAG 2) 7-speed automatic gearboxes (Model designation 722.9). TITAN ATF 4134 provides the required anti-wear and friction modifier additive systems to ensure proper function during the full lifetime of the gearbox. TITAN ATF 4134 is backward compatible to products fulfilling the requirements of MB-Approval 236.12 and substitutes them in almost every application (refer to manufacturer filling instruction).

Please note!! Price of TITAN ATF 4134 drops automatically in larger quantities.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Q8 El Greco 320

Applications Q8 El Greco 320

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 320 drops automatically in larger quantities.