Buy Lubricants — mineral, synthetic, dry & adhesive

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

Mobil DTE 746

Premium Turbine Oils

Application Mobil DTE 746

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include Electric power generation for high output base load utilities. Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes. Gas turbines in Captive Power plants. Gas or steam turbine prime movers. Hydroelectric turbine applications

Mobil DTE PM Excel 150

Paper Machine Lubricant

Application Mobil DTE PM Excel 150

Lubrication of the wet end, press section, calender applications and dry end, including in Voith and Metso (Valmet) paper machines. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

TOTAL PRESLIA 100

Mineral turbine oils.

Applications TOTAL PRESLIA 100

• PRESLIA oils are specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

Your advantage! Price of TOTAL PRESLIA 100 drops automatically in larger quantities.

Shell Turbo S4 GX 46

Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines

Application Shell Turbo S4 GX 46

Power and industrial steam, gas & combined cycle turbines. Shell Turbo S4 GX 46 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines, especially those needing enhanced anti-wear performance to protect highly loaded gearboxes.

Further industrial applications. Shell Turbo S4 GX 46 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors

Klüber Klüberfood NH1 C 6-150

Synthetic oil for chains in can lacquering lines for the food-processing industry

Application Klüber Klüberfood NH1 C 6-150

Klüberfood NH1 C 6-150 may be applied via suitable chain lubrication system. Compatibility of the lubricant with the materials of the reservoir should be checked. To attain the highest performance in curing and lacquering applications please do not hesitate to consult your local Klüber representative. Mixing of Klüberfood NH1 C 6-150 oil with other incompatible or non-food-grade lubricants should be avoided! For object/chain temperatures up to approx. 160 °C as may result from oven temperatures of approx. 300 °C under certain operating conditions. We recommend sufficient air removal under such conditions.

Shell Omala S3 GP oil provides extreme-load protection and performance for industrial gears. It is designed to help with worn, misaligned and contaminated gears. It helps prevent foaming and water contamination, which can reduce gear performance under extreme pressure and contaminated conditions.

Shell Omala S3 GP 460

Properties

Shell Omala S3 GP oil provides extreme-load protection and performance for industrial gears.

It is designed to help solve problems associated with worn, misaligned and contaminated gears.

It is an oil that you can rely on to help prevent foaming and water contamination, which can reduce gear
performance under extreme pressure and contaminated conditions.

Shell Omala S3 GP  is available in viscosity grades ISO 220,320, 460,680 and 1500.

Meets requirements

ANSI/AGMA 9005-E02 (EP)
Arcelor Mittal FT163
David Brown S1.53.101E, except ISO 1500
DIN 51517-3 (CLP), except ISO 1500
ISO 12925-1 Type CKD, except ISO 1500
US Steel 224

TOTAL HYDRANSAFE HFC 146

Fire resistant hydraulic fluid.

Applications TOTAL HYDRANSAFE HFC 146

• HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fireresistant hydraulic fluid.
• regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry
• Hydraulic systems of mould injection machines.
• Operating temperature range is from - 20 °C to + 60 °C.
• When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system

Your advantage! Price of TOTAL HYDRANSAFE HFC 146 drops automatically in larger quantities.

Mobil DTE 846

Superior Performance Turbine Oils

Application Mobil DTE 846

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Previously: Shell Donax TCS 10W-40

High performance synthetic oil for transmissions of earthmoving and agricultural machinery.

Shell Spirax S6 CXME 10W-40 is designed to provide operators with carefree operation and maximum reliability over the life of their equipment. Spirax S6 CXME 10W-40 meets the high demands of Modern Transmissions, Differential, End Drives, Wet Brakes and hydraulic systems of heavy-duty off-highway materials (earthmoving, road construction, construction, mining, quarries ....).

Applications

Shell Spirax S6 CXME 10W-40 is recommended for use in heavy-duty off-road machines from leading manufacturers including, but not limited to, Caterpillar and Komatsu, and transmissions produced by Eaton, ZF, & nbsp;& middot; Dana, Rockwell among others:

• Powershift Transfers and Intermediate Differences
• End drives, differentiators and reducers
• Wet Braking
• Hydraulic systems and hydrostatic transmissions

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

MACRON 2429 S-8

It is based on HC hydro crack base oil technology with very low aromatic content. A combination of polar, extreme pressure and anti-wear addivies provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Properties

MACRON 2429 S-8 is free from zinc, chlorine and active sulphur.

Applications

MACRON 2429 S-8 main application is for grinding cemented carbide with diamond wheels. The product is also suitable for grinding steel with CBN and ceramic wheels at high cutting speeds. The selection of additives along with low viscosity allows finest filtration even below 1 pm mesh.

MACRON 2429 S-8 is inhibited against leaching of cobalt.

Approvals

Product is approved by Waiter, Schutte, Junker, Transor.

 

 

Shell Corena S3 RX46

Premium Screw Compressor Oil long life oil

Benefits of the Corena S3 RX 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 RX 46 is a premium quality synthesized air compressor oil, based on Shell’s advanced Gas-to- Liquids (GTL) base oil technology combined with an advanced performance additive system. It is designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions.

Your advantage: Price Shell Corena S3 RX 46 drops automatically with larger quantities.

Mobil DTE 832

Superior Performance Turbine Oils

Application Mobil DTE 832

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil DTE PM 150

Paper Machine Lubricants

Application Mobil DTE PM 150

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Tellus S4 ME 46 Previous name: Shell Tellus EE

Energy efficient high-performance hydraulic oil

Benefits of the Tellus S4 ME 46 are:

• + Long oil change intervals and protection
• + Energy Efficiency

Shell Tellus S4 ME 46 has been specially designed to help reduce the energy and operating costs of hydraulic systems while maintaining good protection of the hydraulic system.
Shell Tellus S4 ME 46 has a significant improvement in energy efficiency in many applications such as injection moulding machines, metal presses and mining conveyors.
In addition, Shell Tellus S4 ME 46 has very good wear protection and long oil life, which can extend oil change intervals and reduce maintenance costs.

Shell ATF 134 FE

Mercedes-Benz 7-traps Automatic transmissions

Application Shell ATF 134 FE

Shell ATF 134 FE has been specially developed as a first-fill and service oil for the latest generation of fuel-optimized Mercedes-Benz 7-speed automatic transmissions (NAG2FE+). Shell ATF 134 FE is mandatory for all NAG2FE+ automatic transmissions. Shell ATF 134 FE must not be used in older Mercedes-Benz 5 and 7-speed automatic transmissions that require lubricants with MB approvals 236.10, 236.12 or 236.14.

Mobilube S 80W-90

High-quality, heavy-duty oils for gearboxes

for heavily loaded transmission components in road transport, commercial vehicles and passenger cars

Mobilube S 80W-90 is recommended by ExxonMobil for use in applications where API GL-4 / GL-5 is required. < / p>

The main applications of Mobilube S 80W-90 are:

Recommended by ExxonMobil for:

• Passenger cars, light and heavy road transport, buses and vans.
• Heavy vehicle drive lines that require API GL-4 / GL-5 level.