Buy Lubricants — mineral, synthetic, dry & adhesive

Previously: Shell Donax TCS 10W-40

High performance synthetic oil for transmissions of earthmoving and agricultural machinery.

Shell Spirax S6 CXME 10W-40 is designed to provide operators with carefree operation and maximum reliability over the life of their equipment. Spirax S6 CXME 10W-40 meets the high demands of Modern Transmissions, Differential, End Drives, Wet Brakes and hydraulic systems of heavy-duty off-highway materials (earthmoving, road construction, construction, mining, quarries ....).

Applications

Shell Spirax S6 CXME 10W-40 is recommended for use in heavy-duty off-road machines from leading manufacturers including, but not limited to, Caterpillar and Komatsu, and transmissions produced by Eaton, ZF, & nbsp;& middot; Dana, Rockwell among others:

• Powershift Transfers and Intermediate Differences
• End drives, differentiators and reducers
• Wet Braking
• Hydraulic systems and hydrostatic transmissions

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Shell Corena S3 RX46

Premium Screw Compressor Oil long life oil

Benefits of the Corena S3 RX 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 RX 46 is a premium quality synthesized air compressor oil, based on Shell’s advanced Gas-to- Liquids (GTL) base oil technology combined with an advanced performance additive system. It is designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions.

Your advantage: Price Shell Corena S3 RX 46 drops automatically with larger quantities.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Mobil DTE 832

Superior Performance Turbine Oils

Application Mobil DTE 832

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil DTE PM 150

Paper Machine Lubricants

Application Mobil DTE PM 150

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Tellus S4 ME 46 Previous name: Shell Tellus EE

Energy efficient high-performance hydraulic oil

Benefits of the Tellus S4 ME 46 are:

• + Long oil change intervals and protection
• + Energy Efficiency

Shell Tellus S4 ME 46 has been specially designed to help reduce the energy and operating costs of hydraulic systems while maintaining good protection of the hydraulic system.
Shell Tellus S4 ME 46 has a significant improvement in energy efficiency in many applications such as injection moulding machines, metal presses and mining conveyors.
In addition, Shell Tellus S4 ME 46 has very good wear protection and long oil life, which can extend oil change intervals and reduce maintenance costs.

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Shell ATF 134 FE

Mercedes-Benz 7-traps Automatic transmissions

Application Shell ATF 134 FE

Shell ATF 134 FE has been specially developed as a first-fill and service oil for the latest generation of fuel-optimized Mercedes-Benz 7-speed automatic transmissions (NAG2FE+). Shell ATF 134 FE is mandatory for all NAG2FE+ automatic transmissions. Shell ATF 134 FE must not be used in older Mercedes-Benz 5 and 7-speed automatic transmissions that require lubricants with MB approvals 236.10, 236.12 or 236.14.

Mobilube S 80W-90

High-quality, heavy-duty oils for gearboxes

for heavily loaded transmission components in road transport, commercial vehicles and passenger cars

Mobilube S 80W-90 is recommended by ExxonMobil for use in applications where API GL-4 / GL-5 is required. < / p>

The main applications of Mobilube S 80W-90 are:

Recommended by ExxonMobil for:

• Passenger cars, light and heavy road transport, buses and vans.
• Heavy vehicle drive lines that require API GL-4 / GL-5 level.

Mobil DTE PM 220

Paper Machine Lubricants

Application Mobil DTE PM 220

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Spirax S2G 80w-90

Properties

Shell Spirax S3 G 80W is a mineral automotive gear oil containing multi-functional additives required for mild extreme pressure conditions. Shell Spirax G 80w-90 is also known as Shell 80w-90 or 80w90 or 80W/90.

Manual gearboxes
Spirax S2 G are essentially for the lubrication of manual gearboxes of passenger cars and commercial vehicles operating under high speed/low torque and low speed/high torque conditions. Suitable for gearboxes fitted with synchromesh.

Rear axles
Suitable for applications presenting conditions of medium severity, such as light duty commercial vehicles and passenger cars.

Not suitable for heavy duty hypoid axles.

CASTROL Almaredge 11 FF

High performance semi-synthetic metalworking fluid

Application CASTROL Almaredge 11 FF

Almaredge 11 FF is especially designed for grinding of steel and machining cast iron.

CASTROL Radicool SF

Antifreeze Coolant

Application CASTROL Radicool SF

The special inhibitor package used in Castrol Radicool SF enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF provides excellent protection against cavitation corrosion and effective water pump lubrication , reducing wear and noise. The additive technology used in Castrol Radicool SF prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF is approved by a number of OEM's including Merceded Benz, Volkswagon, MAN and Ford. It is also recommended against the following vehicle manufacturer's specifications ; General Motors GM 6277M, Deutz , Cummins IS series and N14 engines, Jenbacher, Komatsu, Renault Type D, Jaguar CMR 8229 and MTU MTL 5048 Series 2000C&I. Castrol Radicool SF contains a bittering agent to deter from accidental ingestion

Klüber Klüberoil 4 UH1-680 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-680 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

TOTAL MULTIS COMPLEX HV2 Moly

Extreme-pressure and high-temperature complex lithium soap grease.

Applications TOTAL MULTIS COMPLEX HV2 Moly

• MULTIS COMPLEX HV2 Moly is adapted to the lubrication of all applications operating under severe conditions, more particularly under high load and high-temperature constraints for which a conventional lithium soap grease is no longer sufficient.
• MULTIS COMPLEX HV2 Moly is a multipurpose grease, specially formulated for the lubrication of ball bearings, plain bearings, roller bearings, subjected to high loads and for lubrication of any application subjected to impacts and vibrations in transportation, agriculture and off-road vehicles
• MULTIS COMPLEX HV2 Moly is also well-suited to any industrial application in which an NLGI 2 grade high-temperature and extreme-pressure grease is required.

Your advantage! Price of TOTAL MULTIS COMPLEX HV2 Moly drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Houghton Garia 602.02 M-15

Properties

Houghton’s Garia™ series line of neat cutting oils contain active chemistry for medium to severe cutting of aluminum, cast iron, steel and stainless steel. Additives ensure long sump life and resistance to dilution with tramp oils.

The oils show excellent results by working with many difficult operations like broaching, deep-hole drilling, tapping, shaping or shaving of gears. 

Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubrication providing  very high efficiency combined with minimum wear of cutting heads and drill guides.

Chlorine Free
Low aromatics 
Low oil mist and evaporation 
Good wetting properties
Free of heavy metals

Houghton Garia 602.02 M-15 is a cutting oil that can be used for machining of a wide variety of materials, such as cast iron, copper alloys, aluminum alloys, steel alloys, stainless steel, acid-and heat-resistant steels.

Houghton 602.02 Garia M-15 was designed for difficult machining operations such as deep drilling, drilling, reaming, threading, grinding, broaching and gear cutting on the above mentioned materials. Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubricity thereby providing  high efficiency combined with minimum wear of cutting heads and drill guides.

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.