Buy Lubricants — mineral, synthetic, dry & adhesive

Klübersynth GH 6-1500

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-1500

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Mobil Nuto H 68

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 68 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 68 drops automatically with higher volumes.

Klüber Summit DSL 125

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 125

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Mobil Nuto H 46

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 46 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 46 drops automatically with higher volumes.

CASTROL HYSPIN AWS 15

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 15

Castrol Hyspin AWS 15 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 15 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 15 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 15 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 15 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 15 drops automatically in larger quantities.

Mobil Nuto H 32

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 32 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 32 drops automatically with higher volumes.

Shell Mysella S3 N 30

Low Ash Gas Engine Oil

Application Shell Mysella S3 N 30

Stationary gas engines with natural gas as fuel. Can also be used with relatively clean alternative gases such as biogas

TOTAL CIRKAN C 150

High quality oils for moving parts.

Applications CIRKAN C 150

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 150 drops automatically in larger quantities.

TOTAL PRESLIA GT 46

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 46

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 46 drops automatically in larger quantities.

Klübersynth GH 6-22

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-22

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Q8 Mahler GR5 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Applications Q8 Mahler GR5 SAE 40

Synthetic based gas engine oil for stationary gas engines operating at mild to severe conditions

Increased demands for lower emissions and higher efficiency in today's gas engines require more oxidation stable engine oils, capable of controlling liner cleanliness and oil consumption at increased liner and piston ring temperatures. Q8 Mahler GR5 has been specifically developed to satisfy these needs.

Your advantage! Price of Q8 Mahler GR5 SAE 40 drops automatically in larger quantities.

TOTAL CIRKAN C 220

High quality oils for moving parts.

Applications CIRKAN C 220

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 220 drops automatically in larger quantities.

Q8 Terra 1000 STOU 10W-40 Previously Q8 T5000 10W-40

Synthetic based Super Tractor Oil Universal

Applications 

• In agricultural equipment preferring one lubricant
• as engine lubricant
• as hydraulic fluid
• as final drive lubricant
• as oil-immersed brake/clutch fluid
• as transmission lubricant

Recommendations

• Q8 Terra 1000 STOU 10W-40 may be used as lubricant in agricultural equipment, when one or more of the following specifications are used to describe the required lubricant

FUCHS Cassida Chain Oil HTE

Synthetic high temperature chain lubricant for food and beverage processing equipment

Application FUCHS Cassida Chain Oil HTE

Drive and transport chains in the food industry. Also intended for use in equipment for manufacturing food packaging

TOTAL AZOLLA DZF 22

Detergent anti-wear hydraulic oils.

Applications TOTAL AZOLLA DZF 22

• Any hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock).
• Any hydraulic circuits working under loaded conditions : lubrication of stamping presses for example (Müller Weingarten approval).
• Any hydraulic circuits subjected to high levels of pollution.

Your advantage! Price of TOTAL AZOLLA DZF 22 drops automatically in larger quantities.

TOTAL EQUIVIS AF 68

High viscosity index hydraulic oils.

Applications TOTAL EQUIVIS AF 68

EQUIVIS AF is a “zinc-free” high performance hydraulic fluid for:

• all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points).
• hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature (-30°C) and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS AF 68 drops automatically in larger quantities.

Eni I-Sint MS 5W-30

Synthetic motor oil for cars and light commercial vehicles

The main applications of Eni I-Sint MS 5W-30 are:

• The oil meets the specifications of ACEA C3, API SN, and BMW Longlife-04.
• It has a viscosity grade of 5W-30, which means it has a low viscosity at low temperatures, providing faster lubrication during cold starts and reducing fuel consumption.
• It has high thermal stability, making it more resistant to oxidation and reducing the formation of deposits.
• It offers excellent protection against wear and corrosion, contributing to a longer engine life.
• It provides good protection for exhaust gas after-treatment systems such as diesel particulate filters (DPF) and catalytic converters.
• It is suitable for both gasoline and diesel engines with direct injection.

Total Multagri Universal 10W-40

Multipurpose oil for the lubrication of all mechanical parts of agricultural machinery.

Applications Total Multagri Universal 10W-40

• TOTAL MULTAGRI UNIVERSAL 10W-40 is intended for diesel engines (with or without turbo) and petrol engines used in agricultural machinery. This lubricant is also suitable for the lubrication of gearboxes, gears, angular gears for which API GL-4 / MIL.L.2105 oil with viscosity SAE 80W-90 is recommended.
• TOTAL MULTAGRI UNIVERSAL 10W-40 is suitable for: Mechanical transmissions equipped with immersed brake discs, gearboxes, differentials, axles, reducers; Hydraulic lifting and auxiliary systems, hydrostatic steering systems; Submerged power take-offs and multi-disc clutches; Hydrostatic steering systems.

TOTAL FINAVESTAN A 520 B

Vegetable demoulding oil for high temperatures.

Applications TOTAL FINAVESTAN A 520 B

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:

• Polymers: plasticizers & external lubricants for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
• Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
• Paper: cut and slit lubricant.
• Dust binder, defoamer, furniture polishes.

The following applications are subject to applicable laws and regulations in each country:

• Demoulding agent, defoamer and protective film in food industry
• Lubricants additive for food industry (Accidental food contact)
• Food processing aid (direct food contact).

• CAS number: 8042-47-5
• EINECS number: 232-455-8
• INCI number (EU): Paraffinum Liquidum.

Your advantage! Price of TOTAL FINAVESTAN A 520 B drops automatically in larger quantities.

TOTAL CIRKAN RO 220

R and O type machine oils.

Applications CIRKAN RO 220

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 220 drops automatically in larger quantities.