Buy Lubricants — mineral, synthetic, dry & adhesive

Shell Tellus S2 VA 46 Previous Name: Tellus TD

Industrial Detergent Hydraulic Fluid for wide temperature range

Shell Tellus S2 VA 46 main applications:

• Mobile Equipment
  Earth moving equipment and similar units subjected to the most severe outdoor operating conditions.

HLPD Oil recommendations: All hydraulic systems for which an HLPD oil is specified.

• Engine Oil Hydraulic Applications
  Hydraulic systems which specify the use of engine oils meeting SAE 10W, 20W-20 or 30 viscosity classifications.
• Other applications
  Certain industrial gearboxes.
  
  

Shell Tellus S2 VA 46 is a high performance detergent-based hydraulic fluid for use where emusifiable fluids are preferred. Using proven zinc-based anti-wear technology Tellus S2 VA 46 provides proven performance in applications such as construction or mobile applications where contamination by water, cleanliness or control of solid contaminants is important in conjunction with a wide range of operating temperatures.

Please note!! Price of Shell Tellus S2 VA 46 drops automatically in larger quantities.

Shell Mysella S5 S 40 

Long Life, Low Ash Gas Engine Oil

Shell Mysella S5 S 40 main applications:

• Gas Engines All types of 4-stroke gas engines burning biogas, sewage gas or landfill gas.

Shell Mysella S5 S is a premium gas engine oil, formulated for use in engines burning non-natural “sour” gas, such as biogas, sewage gas and landfill gas. Shell Mysella S5 S has been specially developed to provide extended oil drain intervals in engines running on biogas, sewage gas and landfill gases. Shell Mysella S5 S uses a formulation which has been optimised to resist the corrosive and oxidative effects of sulphuric and halogenic acids which are often present in these gases. Thanks to its low ash content, Shell Mysella S5 S minimizes the contribution of the lubricating oil to combustion chamber deposits.

Please note!! Price of Shell Mysella S5 S 40 drops automatically in larger quantities.

CASTROL Hyspin ZZ 32

Hydraulic oil for the highest demands

Application CASTROL Hyspin ZZ 32

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 32 drops automatically in larger quantities.

Shell Mysella S3 N 40 Previous Name: Mysella LA

Low Ash Stationary Gas Engine Oil

Shell Mysella S3 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas
• May also be used for landfill and biogases
  
  

Shell Mysella S3 N 40 is a high performance quality oil blended for use in 4-stroke, spark-ignition engines which require a 'low ash' oil and use natural gas as fuel. Shell Mysella S3 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology.

Please note!! Price of Shell Mysella S3 N 40 drops automatically in larger quantities.

Q8 Hoffmeister 46

Zinc- and detergent-based hydraulic oil with high viscosity index

Applications Q8 Hoffmeister 46

Q8 Hoffmeister 46 is perfect for usage for hydraulic systems in off-road applications and mobile construction equipment. Thanks to its detergent functionalities, this oil is the ideal solution for hydraulic systems where water and pollution can be a problem. It can be used in the most extreme temperatures: from high to low.

Your advantage! Price of Q8 Hoffmeister 46 drops automatically in larger quantities.

Shell Mysella S3 S 40 Previous Name: Mysella MA

Medium Ash Gas Engine Oil

Shell Mysella S3 S 40 main applications:

• Spark-ignited gas engines fuelled by natural gas requiring a medium ash oil
• Ideal for engines fuelled by sour gases
• "Dual-fuel" gas engines ignited by diesel pilot fuel

Shell Mysella S3 S is a high performance quality oil blended for use in 4-stroke, spark-ignition engines which require a 'medium ash' oil or use sour gases such as landfill, bio or sewage gas as fuel. Shell Mysella S3 S is also suitable for engines that traditionally require a medium ash oil to protect the valve seating area of the cylinder head. Shell Mysella S3 S satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology.

Please note!! Price of Shell Mysella S3 S 40 drops automatically in larger quantities.

Shell Tellus S3 M 22 hydraulic fluid

Premium Zinc-Free Industrial Hydraulic Fluid

Properties

Shell Tellus S3 M 22 hydraulic fluids are high performance lubricants that use exclusive ashless technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations.

They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease the efficiency of your hydraulic system.

Shell Morlina S1 B 100 Previous Name: Vitrea M

Industrial Bearing & Circulating Oils

Shell Morlina S1 B 100 main applications:

• Machine circulation systems
• Oil lubricated bearings Suitable for most plain and rolling element bearings in general industrial applications
• Roll-neck bearings
• Enclosed industrial gear systems Low or moderately loaded enclosed gears where EP performance is not required.

Shell Morlina S1 B oils are high performance oils designed to provide excellent protection for most industrial bearing and circulating oil system applications, particularly those processes where water shedding (demulsification) is important for the life of the equipment. Meets the most basic requirements of the Morgan standard for common bearing oils

Please note!! Price of Shell Morlina S1 B 100 drops automatically in larger quantities.

Shell Rimula R5 LM 10W-40 (E6/228.51)

Synthetic Technology Heavy Duty Diesel Engine Oil

Shell Rimula R5 LM 10W-40 (E6/228.51) main applications:

• European heavy duty engines
• Low emission engine use
  
  

Shell Rimula R5 LM 10W40 Energised Protection oil features ""Low-SAPS"" additive technology for increased compatibility with the latest exhaust emissions control systems. Protective power is further energised by the use of a highly active additive technology enhanced with synthetic technology base oils that further enhances the oil performance to deliver responsive protection that continuously adapts to your driving conditions resulting in maintenance saving long oil drain capability.

Please note!! Price of Shell Rimula R5 LM 10W-40 (E6/228.51) drops automatically in larger quantities.

Shell Corena S3 R 68 vorher Comptella S 68

Premium Rotary Air Compressor Oil

Application Shell Corena S3 R 68

Rotary sliding vane and screw air compressors. Shell Corena S3 R is suitable for use in oil-flooded/ oil injected single or two-stage rotary vane or screw air compressors.

Shell Morlina S2 B 46 Previously Morlina 46

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 46 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 46 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 46 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 46 drops automatically with larger quantities.

Shell Sirius X 40

Super High Performance Diesel Engine Oil

Shell Sirius X 40 main applications:

• High-speed diesel engines operating on distillate fuels.
• N.B. Not suitable for N. American automotive type engines, for which API CF-4 type oils are required.

Shell Sirius X 40 is a top quality lubricant, of the Super High Performance Diesel Engine Oil (SHPDO) class. It is designed for the highest output, high-speed diesel engines, burning distillate fuel and is formulated to give better engine protection and longer drain intervals than normal diesel engine oils. Shell Sirius X 40 is especially suitable for the high power/weight units used in fast vessels and compact generator sets.

Please note!! Price of Shell Sirius X 40 drops automatically in larger quantities.

TOTAL CIRKAN C 68

High quality oils for moving parts.

Applications CIRKAN C 68

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 68 drops automatically in larger quantities.

Shell Sirius X 30

Super High Performance Diesel Engine Oil

Shell Sirius X 30 main applications:

• High-speed diesel engines operating on distillate fuels.
• N.B. Not suitable for N. American automotive type engines, for which API CF-4 type oils are required.
  
  

Shell Sirius X 30 is a top quality lubricant, of the Super High Performance Diesel Engine Oil (SHPDO) class. It is designed for the highest output, high-speed diesel engines, burning distillate fuel and is formulated to give better engine protection and longer drain intervals than normal diesel engine oils. Shell Sirius X 30 is especially suitable for the high power/weight units used in fast vessels and compact generator sets.

Please note!! Price of Shell Sirius X 30 drops automatically in larger quantities.

Shell Turbo Oil T 32

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 32 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 32 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 32 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 32 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

Shell Morlina S1 B 220 previously Shell Vitrea 220

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 220

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Q8 Gear Oil XG 80W-90

Automotive universal transmission lubricant

Applications Q8 Gear Oil XG 80W-90

In synchronised and non-synchronised manual transmissions, axles and drive line components requiring API GL-4/GL-5 performance level.

Approved by Scania in certain categories for use in extended drain application (180000 km).

Your advantage! Price of Q8 Gear Oil XG 80W-90 drops automatically in larger quantities.

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

Shell Corena S3 R46 (Previous Name: Corena S2 R46 / Comptella 46)

Premium Screw Compressor Oil

Benefits of the Corena S3 R 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 R 46 is a high-performance compressor oil for the lubrication of rotary vane pumps and screw compressors. With the additive system used, Shell Corena S3 R 46 offers excellent protection and very good performance at oil change intervals up to 4000 hours, under certain conditions even up to 6000 hours

TOTAL CARTER EP 1500

Viscous semi-synthetic oils for enclosed gears.

Applications TOTAL CARTER EP 1500

The viscous CARTER EP oils have been specially designed for lubricating enclosed gears operating under severe conditions:

• heavy loads
• slow to very slow moving parts
• shocks
• High temperatures

Your advantage! Price of TOTAL CARTER EP 1500 drops automatically in larger quantities.