Klüber oil & grease lubricants

ISOFLEX TOPAS L 32 N

Special low-temperature greases

Most important applications of ISOFLEX TOPAS L 32 N are:

• + Designed for extremely low temperatures
• + Long Life grease
• + Contains a UV indicator
   

ISOFLEX TOPAS L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.

Klüber Klübersynth UH1 6-100

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Klüber Klübersynth UH1 6-100

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Klüber Klübersynth UH1 6-150

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Klüber Klübersynth UH1 6-150

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Klüber Paraliq 91

Synthetic lubricating oil for use in the food and pharmaceutical industries

Application Klüber Paraliq 91

PARALIQ 91 is used as release agent for baking tins and moulds in the food-processing industry. The lubricant can also be used as high-performance needle and sinker oil in textile machines as well as for deep-drawing or bending of packages for the pharmaceutical and foodprocessing industries. This special oil is tried-and-tested as release agent for moulds in blister machines used for the deep-drawing of film (bottom film).

Klüber Unimoly GL 82

Lubricating grease containing MoS2

Application Klüber Unimoly GL 82

UNIMOLY GL 82 is a rolling and sliding bearing grease for machines and appliances exposed to extreme loads; it meets the general requirements and specifications set forth by automobile manufacturers. UNIMOLY GL 82 can also be used for wheel bearings in rail and road vehicles.

Klüber Klübertec CM 6-100

High-performance oils for cold forming

Application Klüber Klübertec CM 6-100

Klübertec CM 6 oils may be used in many cold-forming applications as well as for blanking and shearing of thin or thick sheet metal. Examples of applications are: Forming under tensile or compressive conditions such as rolling or deep-drawing; Forming under bending conditions, hydro-forming; Precision blanking of aluminium or aluminium alloys (see application notes), nonferrous metals, steel or stainless steel.

Klüber Klüberfood 4 NH1-32

Synthetic hydraulic oils for the food and pharmaceutical industries

Application Klüber Klüberfood 4 NH1-32

Klüberfood 4 NH 1 hydraulic oils are used especially in the food-processing and pharmaceutical industries.

Klüber MICROLUBE GBU-Y 131

Special grease for the lubrication of rolling and plain bearings subject to humidity and water

Application Klüber MICROLUBE GBU-Y 131

MICROLUBE GBU-Y 131 is intended for the lubrication of plain and rolling bearings operating under medium to high loads as well as under the influence of humidity and water. MICROLUBE GBU-Y 131 has proven particularly successful for lubrication of the fixed or detachable rope grips of ski lifts.

Klüber Klüberbio RM 2-150

Environmentally compatible, synthetic stern tube oils

Application Klüber Klüberbio RM 2-150

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals. Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers. Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.

Klüber Klübersynth CH 2-100 N

High-temperature chain oils

Application Klüber Klübersynth CH 2-100 N

The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards

Klüber Klübersynth UH1 64-1302

Synthetic lubricating grease for the food and pharmaceutical industry

Application Klüber Klübersynth UH1 64-1302

Good adhesiveness, excellent protection against wear and strong resistance to steam and water make Klübersynth UH1 64-1302 ideal for the following applications: high-load lowspeed rolling and plain bearings, joints, toothed racks, tubular tracks, cams, stuffing boxes, high-load and grease-lubricated chains, etc

Klüber PARALIQ GA 351

Special lubricating grease for the food and pharmaceutical industries

Application Klüber PARALIQ GA 351

PARALIQ GA 351 can be used for all lubrication points in the food industry. Application examples: Rolling and plain bearings in machines of the food and pharmaceutical industries; Metering pistons in cup filling and sealing machines; Tubular tracks in slaughterhouses

Klüber Klüberbio RM 2-100

Environmentally compatible, synthetic stern tube oils

Application Klüber Klüberbio RM 2-100

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals. Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers. Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.

Klüber POLYLUB WH 2

Multi-purpose grease

Application Klüber POLYLUB WH 2

POLYLUB WH 2 is a multipurpose grease for a wide range of applications and is preferrably used for the lubrication of rolling and plain bearings, slideways, cylinder guides, rollers, cams, gears, racks, filling and capping machines, washing machines and transport systems.

Klüber Constant OY 46 K

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Constant OY 46 K

CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Klüberplex BEM 34-132

Speciality rolling bearing grease for demanding applications

Application Klüber Klüberplex BEM 34-132

Klüberplex BEM 34-132 is used for ball bearings and linear guides, ball screws subject to oscillating motion, high loads and vibration. These may typically be found in: hub units (wheel bearings), shock absorber bearings, water pump bearings and cardan joint bushes in vehicles; guides in machine tools and working machines; linear bearings in wet processing zones of textile machines, paper-making machines, conveyors and pumps Klüberplex BEM 34-132 is also suitable as sealing grease for rolling bearings due to its excellent media resistance.

Klüber Klüberbio EG 2-68

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-68

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Klüber Klübertherm CH 2-260

High-temperature oil

Application Klüber Klübertherm CH 2-260

Klübertherm CH 2-260 lubricates the chains/steel belts and chain carpets in continuous wood presses used for the manufacture of particle, MDF, HDF, THDF, OSB or LVL boards. Especially for the systems: ContiRoll® or contipressTM of Messrs. Siempelkamp or Conti-Panel-System (CPS) of Messrs. Dieffenbacher Other possible applications are: Oil-lubricated stenter chains in the textile industry, especially when operated at elevated temperatures for synthetic fabrics. Drive chains and transport chains for festoon dryers, festoon steamers and coating installations.

Klüber Klüberoil 4 UH1-220 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-220 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.