Klüber oil & grease lubricants

Klüber AMBLYGON TA 15-2

Special grease for long-term lubrication and high temperatures

Application Klüber AMBLYGON TA 15-2

AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in conveyors; kilns (rotary tubular kilns); water pumps; hot rollers; tarmac laying machines; gate valves; seals; washing machines and dishwashers; impact mechanism in power tools; joints, hinges; king pins. AMBLYGON TA 15/2 is also used in combination with mineraloil-resistant elastomer seals.

Klüber Klüberplex BEM 41-141

Lubricant for rolling and plain bearings subject to high loads

Application Klüber Klüberplex BEM 41-141

Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations. Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

Klüber Klüberplex BEM 41-141 is particularly widely used in the wind industry for wind turbines.

Klüber Klüberfood 4 NH1-46

Synthetic hydraulic oils for the food and pharmaceutical industries

Application Klüber Klüberfood 4 NH1-46

Klüberfood 4 NH 1 hydraulic oils are used especially in the food-processing and pharmaceutical industries.

Klüber Klüberoil GEM 1-220 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-220 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber Klüberoil GEM 1-68 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-68 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber GRAFLOSCON C-SG 2000 ULTRA

Operational lubricant for open drives

Application Klüber GRAFLOSCON C-SG 2000 ULTRA

GRAFLOSCON C-SG 2000 ULTRA is designed for spray lubrication of open pinion gears exposed to extremely high tooth flank loads on rotary kilns, tube mills, and line blenders which are used in the cement, lime, gypsum, mining, and chemical industries. GRAFLOSCON C-SG 2000 ULTRA is also suitable for drives exposed to high oscillations or drives in which rolling bearings are mounted. It lubricates and protects all other open gears, drives subject to high thermal loads (spur and bevel gears) as well as slide and guide rails, large chains, wire ropes and similar devices. GRAFLOSCON C-SG 2000 ULTRA is especially suitable for application under hot climatic conditions and in heated spray systems.

Klüber Klüberalfa DH 3-350 N

Lubricating oil with good wetting properties for plastic friction points

Application KKlüber Klüberalfa DH 3-350 N

Klüberalfa DH 3 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples: – Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises – Impact, rubbing and sliding points inside cars, even of various material pairings – Sliding guides in the centre console, cup holder, navigation screen – Locking mechanism of trays, ventilation flaps, etc. General behaviour towards plastics and elastomers Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come into contact, must be confirmed.

Klüber STABURAGS NBU 8 EP

Rolling bearing and high-pressure grease

Application Klüber STABURAGS NBU 8 EP

STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear. It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.

Klübersynth GH 6-220

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-220

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klüber Tyreno Fluid E-95V

for low and fine vacuum applications

Application Klüber Tyreno Fluid E-95V

Working fluid for mechanical backing pumps extracting aggressive gases and vapours, but not oxygen or halogens. Universal oil offering a high viscosity index, excellent condensate separation and dispersing effect. Klüber Tyreno Fluid E-95V achieves a final pump pressure of approx. 10–2 mbar measured in a double-stage backing pump.

Klüber Klüberfluid NH1 4-005

Synthetic barrier fluid for mechanical seals

Application Klüber Klüberfluid NH1 4-005

Klüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years. Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil's viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005. Which type of barrier fluid should be chosen depends on the type of seal elastomer as well as on the application's process conditions. For forced circulation, the oil should have a viscosity of 12 - 90 mm²/s. Klüber Lubrication offers solutions also for these cases. Our experts will be pleased to provide advice.

Klüber STABURAGS NBU 12/300 KP

Long-term grease for rolling and plain bearings

Application Klüber STABURAGS NBU 12/300 KP

STABURAGS NBU 12/300 KP is a rolling bearing grease for long-term and lifetime lubrication of drafting equipment in spinning machines (upper and lower rollers), tension and eccentric rollers, cardan shafts and rolling bearings in fans and ventilation systems.

Klüber Klübersynth UH1 64-62

Synthetic lubricating grease suitable for use in the food-processing and pharmaceutical industries

Application Klüber Klübersynth UH1 64-62

Klübersynth UH1 64-62 is suitable for lubrication points in machines and installations used in the food-processing and pharmaceutical industries, particularly for all points where contact between the lubricant and the food product cannot be excluded. We recommend lubricating all friction points with Klübersynth UH1 64-62 in order to avoid negative effects caused by lubricant spreading.

Klüber Klüberplex BE 31-102

Lubricating greases for extreme requirements

Application Klüber Klüberplex BE 31-102

Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

Klüber Klübersynth PEG 46-121

Special greases for the lubrication of enclosed gear drives

Application Klüber Klübersynth PEG 46-121

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.

Klüber Presspate SEM 95/800 T

High-performance lubricants for cold forming of sheets and tubes

Application Klüber Presspate SEM 95/800 T

You may use PRESSPATE SEM 95/800 T and PRESSPATE TB for highly varied applications in cold metal forming, especially for sheet metal and tubes. This includes processes such as: drawing and deep drawing; bending; hydroforming; tube bending using a mandrel; calibrating sintered parts upon sintering Both products have been successfully used in the processing of alloys based on steel, stainless steel, brass, aluminium and titanium.

Klüber Paraliq P 12

Lubricating oils for the food and pharmaceutical industries

Application Klüber Paraliq P 12

PARALIQ P 12 and P 40 can be used for machines in the foodprocessing and pharmaceutical industries requiring medically pure oils, e.g. spindles, joints, chains, gearwheels, plain bearings, pistons, guides and tubular tracks. The oils can also be used for corrosion protection. PARALIQ P 12 can also be used as a heat transfer oil in enclosed systems in the food-processing, pharmaceutical and cosmetics industries.

Klüber MICROLUBE GB 00

Fluid gear grease

Application Klüber MICROLUBE GB 00

MICROLUBE GB 00 is suitable for the lubraction of rams in mechanical presses, heavy-duty oiltight spur and bevel gears (e.g. gear motors, small gears), worm gears with steel/ steel components as well as toothed couplings. It is also suitable for the lubrication of slideways, guides and large chain drives.