Buy Lubricants — mineral, synthetic, dry & adhesive

Fuchs Cassida Chain Oil 150

Chain lubricant for food & beverage processing equipment.

Fuchs Cassida Chain Oil 150 and 1000 are fully Synthetic high performance, antiwear chain oils which have been specially developed for use in machinery used in the food and beverage processing and packaging industry.

Properties

They are formulated using a careful blend of synthetic fluids and additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Certified by NSF for ISO 21469 and registered by NSF (Class H1) for use where there is potential for incidental food contact.

Products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Klüber Klüberoil 4 UH1-320 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-320 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

CASSIDA FLUID CR 100

Compressor lubricants for food manufacturing machinery

CASSIDA FLUID CR 100 main applications:

• Screw and vane compressors
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes

CASSIDA FLUID CR 100 are high performance fluids specially developed for use in rotary screw and vane air compressors used in the food and beverage processing and packaging industry. CASSIDA FLUID CR 100 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of CASSIDA FLUID CR 100 drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/1000

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/1000

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/1000 drops automatically in larger quantities.

CASSIDA CHAIN HT

High temperature chain lubricant for food & beverage processing equipment

CASSIDA CHAIN HT E main applications:

• Drive and transport chains in the food Industry
• Also intended for use in equipment manufacturing food packaging

CASSIDA CHAIN OIL HTE is a fully synthetic, high performance silicone based oil which has been specially formulated for the food industry to lubricate drive and transport chains at elevated temperatures. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA CHAIN HTE drops automatically in larger quantities.

Castrol Optileb™ CH 150 – NSF H1 Food Grade Synthetic Chain Oil ISO VG 150

Castrol Optileb™ CH 150 is a high-performance synthetic ISO VG 150 chain oil based on PAO (Polyalphaolefin), specially developed for applications in the food processing industry. This NSF H1 registered chain lubricant is suitable for use where incidental contact with food is technically unavoidable.

Klüber Klüberlectric BE 44-152

Electroconductive rolling bearing grease

Application Klüber Klüberlectric BE 44-152

Klüberlectric BE 44-152 has been designed for the long-term lubrication of rolling bearings in which static electricity may occur, such as electric motors, paper-making machines, copying machines, film-stretching stenters, guides in conveyors and fans. Klüberlectric BE 44-152 has proven efficient for ball and roller bearings subject to a current intensity of approx. 1 Ampere. The electric conductivity of Klüberlectric BE 44-152 has been determined in tests based on DIN 62631-3-1. On the rolling bearing test rig FAG-FE9 acc. to DIN 51 821 and on FAG-FE8 acc. to DIN 51 819, the product showed very good service life and wear protection.

Klüber Klüberfood NH1 CH 6-120 SUPREME

High-temperature chain oil for the food-processing and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 6-120 SUPREME

This product can be used for the lubrication of transport chains of industrial ovens in the food processing industry operating at very high temperatures, e.g. plate carrier chains in baking ovens commonly found in bread, tortilla and pizza production lines.

Klüber UNISILKON GLK 112

Special grease for Bowden cables, seals and plastics

Application Klüber UNISILKON GLK 112

UNISILKON GLK 112 is primarily used for the lubrication of rubber/metal, plastic/metal or plastic/plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables. In such applications, UNISILKON GLK 112 reduces friction, prevents squeaking noises and forms a protective layer against atmospheric attack on rubber and plastics. UNISILKON GLK 112 can be used in many components where lifetime lubrication is required.

Klüber Summit PS 300

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 300

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber Summit PS 400

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 400

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

CASTROL Spheerol™ BNS 2

High temperature bearing grease

Application CASTROL Spheerol™ BNS 2

Spheerol BNS 2 is suitable for the lubrication of bearings at high temperatures, such as soot blower bearings, in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, etc. Spheerol BNS 2 can be used at a temperature range of -20ºC to +150ºC, and for short periods at a temperature range of up to +220ºC. Frequent re-greasing or grease change should be considered subject to application requirements.

Your advantage! Price of CASTROL Spheerol™ BNS 2 drops automatically in larger quantities.

CASSIDA FLUID VP 100 

Synthetic lubricants for use in vacuum pumps for food and beverage processing equipment

CASSIDA FLUID VP 100 main applications:

• Vacuum pumps which produce medium vacuum

CASSIDA FLUID VP 100 are high performance fluids specially developed for use in vacuum pumps used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fl uids and selected additives chosen for their ability to meet the stringent requirements of the food and beverage industry.

Your advantage! Price of CASSIDA FLUID VP 100 drops automatically in larger quantities.

Klüber BARRIERTA L 25 DL

Special lubricating grease for the lubrication of sensitive plastics and elastomers

Application Klüber BARRIERTA L 25 DL

BARRIERTA L 25 DL is preferably used for lubricating seals in train doors. It has also been used as a special lubricant for optical equipment for many years.

Klüber Summit SH 68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 68

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Paraliq P 100

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 100

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

Klüber Summit PS 200

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 200

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber Klüberfood NH1 CH 2-220

High-temperature chain oils for the food and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 2-220

The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry

Klüber Contrakor Fluid H 1

Long-term corrosion preventive, effective rust remover

Application Klüber Contrakor Fluid H 1

Corrosion preventive for all metallic surfaces, especially on machines, devices, tools, moulds, wire ropes, vehicles, battery terminals. Especially suitable for the long-term preservation of spare parts stored indoors. Rust remover for all parts affected/immobilised by rust, e.g. screw joints, pins, hinges, slides. The fluid spreads well and thoroughly penetrates the affected surfaces. A light rust film will be dis-solved quickly, severe rust takes somewhat longer. Lubricant For chains, bearings, springs, sliding points, wire ropes, antennas and joints. A thin fluid film is sufficient to ensure reliable reduction of friction and wear. Dehydrating oil, moisture repellent for antenna boxes, ignition timers and ignition cables; in general for machines and devices that are frequently operated under open-air conditions. The fluid penetrates beneath moisture and repels water. Contact oil for clamped and screwed electric contacts and couplings. Ensures reliable passage of current and repels water. Machining fluid to provide cooling in machining pro-cesses without a coolant circuit. Helps to preserve tools and work-pieces and leads to better results. Cleaning and care fluid for penetration and dissolution of dirt, oil residues, scale, etc. Protects bright metal surfaces and preserves the appearance of decorative parts.