Buy Lubricants — mineral, synthetic, dry & adhesive

Castrol Vecton Long Drain 5W-30 E7 previously Fuel Saver 5W-30 E7

Fuel-saving engine oil

TOTAL BIOHYDRAN TMP 32

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 32

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 32 drops automatically in larger quantities.

Klüber Klüberoil 4 UH1-460 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-460 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Total Biomerkan RS

Biodegradable water resistant calcium grease.

Applications Total Biomerkan RS

• BioMERKAN RS is pre-eminently designed for the lubrication of slow rotating slide bearings and articulations used in marine applications such as stern tubes, and ‘industrial’ applications such as conveyor belts
• BioMERKAN RS has been developed for loss lubrication in environmental sensitive areas, is also suitable as a non “EP” general purpose grease in a wide range of ‘outdoor’ applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

CASTROL Iloform PN 226

High performance neat cutting oil

Application CASTROL Iloform PN 226

Iloform PN 226 is specially formulated for use in single die and progressive die presses for medium to heavy deep drawing applications. It is suitable for use on steels, stainless steels and nickel alloy steels

Total Multis Complex SHD 220

Synthetic high-performance lithium complex, Extreme-pressure grease.

Applications Total Multis Complex SHD 220

• MULTIS COMPLEX SHD 220 is a very high performance synthetic grease recommended for the lubrication in all industrial applications under severe conditions and more especially designed in case of high temperature applications in which a lithium grease or a conventional complex lithium grease is not sufficient
• MULTIS COMPLEX SHD 220 is a grease offering an excellent protection of bearings subjected to high loads and slow to moderate rotational speeds. Is also suitable for applications under wet conditions. Could be used in case of plastic contacts.
• MULTIS COMPLEX SHD 220 is especially designed for dry section in papermaking industry, in particular felt rolls. Moreover, the low volatility of the synthetic base oil together with the excellent high temperature properties enable maximization of the lubrication intervals.
• MULTIS COMPLEX SHD 220 is recommended for temperatures between -50°C and +160°C.

Shell Omala S4 GXV 150 previously S4 GX 150

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 GXV 150 main applications:

• Manufacturing and industrial gear systems
• Gear motor systems and other inaccessible installations
• Excellent compatibility with seals, paints and sealants
• Enclosed industrial gear systems

Shell Omala S4 GXV 150 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG, offering outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.

Pay attention! Price of Shell Omala S4 GXV 150 drops automatically in larger quantities.

Cassida Grease RLS 2

Grease for food & beverage processing equipment

Cassida Grease RLS 2 main applications:

• Rolling element and plain bearings
• Joints and linkages open to the atmosphere
• Automatic, centralised lubrication systems
• CASSIDA GREASE RLS 1 is recommended for Lincoln centralised lubrication systems

Cassida Grease RLS 2 is also available in spray form, FLT product code 7547.

Cassida Grease RLS 2 are specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. They are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of Cassida Grease RLS 2 drops automatically in larger quantities.

Houghton Dromus B

Water miscible metalworking fluid.

Houghton Dromus B is a general purpose soluble oil for light to moderate duty machining on a wide range of materials.

It is free from biocides.

Properties:

Dromus B is a high mineral oil content soluble oil for easy to medium duty machining, including grinding, on a wide variety of materials including ferrous as well as nonferrous metals.

Recommendations for use: General machining 6 - 8 %, Severe cutting operations 8 - 12 %.

TOTAL DACNIS SH 32

PAO Synthetic oils for rotary air compressors.

Applications TOTAL DACNIS SH 32

• Lubrication and cooling of the following types of air compressors: - rotary screw compressors (ISO VG 32, 46, 68) - reciprocating compressors (ISO VG 100).
• Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.
• Recommended for the lubrication of gears, plain and roller bearings working under severe conditions, where a CKS level is required.

Your advantage! Price of TOTAL DACNIS SH 32 drops automatically in larger quantities.

QH Pressmax WN 6270

SOLUBLE COLD DEFORMATION OIL

Application QH Pressmax WN 6270

QH PRESSMAX™ WN 6270 is a soluble oil which can be used for deep drawing and blanking operations. QH PRESSMAX™ WN 6270 is suitable for steel of medium to high tensile strength, Titanium and Aluminium alloys.

CASSIDA GREASE HDS 2

Extreme pressure grease for food & beverage processing equipment

Cassida Grease HDS 2 main applications:

• Slow and medium speed plain and rolling element bearings
• Heavy loaded and shock loaded applications
• Joints, linkages and slides
• Overhead track systems

Cassida Grease HDS 2 may also be used as protective anti-rust films and as release agents on gaskets and seals of tank closures.

Cassida Grease HDS 2 are very high performance heavy-duty lubricants specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. Cassida Grease HDS 2 are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of Cassida Grease HDS 2 drops automatically in larger quantities.

Houghton Garia 603 S-15 

Neat Cutting Oil for Broaching and Severe Machining.

GARIA 603 S-15 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 603 S-15 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications:

GARIA 603 S-15 is a high performance product for severe operations as well as for difficult to machine materials.

GARIA 603 S-15 is designed for deep drilling with BT A. Ejector and gun drills. The oil has proven performance for severe broaching e.g. for internal broching of planetary gear rings.

Approved by Klingelnberg for Titanium grinding.

Klüber Tyreno Fluid M-100V

for low and fine vacuum applications (mech. backing pumps)

Application Klüber Tyreno Fluid M-100V

Working fluid for universal application in oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. Klüber Tyreno Fluid M-100V achieves a final pump pressure of approx. 10–3 mbar measured in double-stage backing pumps.

CASTROL SPHEEROL EPL 00

Bearing grease

Application CASTROL SPHEEROL EPL 00

The Spheerol EPL 00 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 00 drops automatically in larger quantities.

CASTROL Hyspin Spindle Oil 10

Spindle Oils

Application CASTROL Hyspin Spindle Oil 10

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil 10 drops automatically in larger quantities.

Renolit LZR 000

Renolit LZR 000 field of applications:

RENOLIT LZR 000 is primarily used in centralized lubricating systems of trucks and commercial vehicles. Furthermore, RENOLIT LZR 000 is usable in low loaded industrial gears.

Please note!! Price of Renolit LZR 000 drops automatically in larger quantities.

Mobil Delvac 1 ATF

Vehicle Lube ATF fluid

Advanced Technology Synthetic Automatic Transmission Fluid

Most important applications of Mobil Delvac 1 ATF are:

• + Mobil Delvac 1 ATF is recommended by ExxonMobil for use in modern high performance trucks, buses, utility vehicles, haulers, vans and other equipment requiring Allison TES-295 or MB-Approval 236.91 performance levels.

Pay attention! Price of Mobil Delvac 1 ATF drops automatically with higher volumes.

TOTAL FINASOL BIO

Multipurpose biotechnologic emulsifiable degreaser

Applications TOTAL FINASOL BIO

• Cleaning of vehicle engines and chassis
• Cleaning of cement or tiled floors in workshops, industrial plants, car parks, garages and service stations
• Cleaning of lubrication bays and pits
• Cleaning of oil-fired boiler house floors and petroleum product storage areas
• Cleaning of public works engines
• Cleaning of road and maritim engines
• Removing of tar, gasoline, diesel, kerosene, domestic fuel or oil fuel.
• Cleaning of machine tools and machine parts
• Removing of anti-rust protection coatings
• Cleaning of brushes and tools used for painting

Your advantage! Price of TOTAL FINASOL BIO drops automatically in larger quantities.

Aeroshell Turbine Oil 560

Synthetic lubricating oil for aircraft turbine engines

Application Aeroshell Turbine Oil 560

Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions. AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas. By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560: maintains a cleaner engine; provides improved load carrying capacity; reduces maintenance costs; prolongs bearing life in both new and existing engines. In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF-23699 was re-written to include a "High Thermal Stability" (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil. With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification, AeroShell Turbine Oil 560 was approved as a SPC (Standard Performance Capability) oil. With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance. AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.