Buy Lubricants — mineral, synthetic, dry & adhesive

Mobil ATF SHC

Mobil Passenger Vehicle Lube

Superior Performance Synthetic Automatic Transmission Fluid

Most important applications of Mobil ATF SHC are:

• + Mobil ATF SHC is recommended by ExxonMobil for use in modern high performance transmissions operating in the severe, high-temperature, heavy load or cold climate applications. It is ideal for manual transmissions designed to operate with ATF fluids, where it will provide excellent gear shifting and protection under severe operating conditions.

Pay attention! Price of Mobil ATF SHC drops automatically with higher volumes.

Shell Gadus S4 V45AC 00/000 Previous Name: Retinax Grease CSZ, Shell Ossagol V

Advanced Multipurpose Grease

Shell Gadus S4 V45AC 00/000 main applications:

• Centralised chassis lubrication systems on trucks and buses or other “one-shot” systems.
• Pneumatic tools.

Shell Gadus S4 V45AC Grease is a fluid grease for use in centralised lubrication systems. This grease is based on highly refined mineral as well as selected synthetic base oils, extreme-pressure and other carefully selected additives to provide excellent protection in all conditions.

Please note!! Price of Shell Gadus S4 V45AC 00/000 drops automatically in larger quantities.

Klüber Summit PS 150

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 150

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Fuchs Renolin EP 150 previously Renolin CLP 150

Heavy duty - EP 150 - industrial gear oils of highest performance, outstanding extreme pressure characteristics and load carrying capacity

Renolin EP 150 field of applications:

The Renolin EP 150 oils are recommended for industrial spur-, helical- and bevel enclosed gears with circulation or splash lubrication, operating at oil temperatures up to 100ºC and peaks above (up to 120ºC).

Castrol Magna SW D 32 slideway oil

(formerly Magnaglide D 32)

Examples of application of Castrol Magna SW D 32 slideway oilare:

• + Exceptional resistance to stick-slip, so higher quality of production
• + Very good demulsifying property - prevents emulsion on the plastic pipes and thus avoids wear and downtime for repair. The oil can easily be removed from emulsions, which can significantly extend their tool life.
• + Protects metals from corrosion.
• + Excellent wetting which reduces the wear and tear on the track

CASTROL HYSPIN AWS 10

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 10

Castrol Hyspin AWS 10 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 10 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 10 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 10 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 10 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 10

Your advantage! Price of CASTROL HYSPIN AWS 10 drops automatically in larger quantities.

CASTROL Hyspin AWH-M 32

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 32

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 32 drops automatically in larger quantities.

Q8 Schumann 68

Ultra-high performance compressor oil

Applications Q8 Schumann 68

All reciprocating- (piston), rotary screw- and vane type compressors Single- and multistage air compressors in both stationary and mobile applications Compressor units operating under severe conditions as well as systems with critical parts such as gears and bearings

Your advantage! Price of Q8 Schumann 68 drops automatically in larger quantities.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL SPHEEROL LC

Long-term Grease

Application CASTROL SPHEEROL LC

Due to its high load carrying capacity and its water resistance Spheerol LZ is suited for the universal use in building site operations and in all transport devices. In addition it can be used in machines of the agricultural and forestry sector and also for demanding grease lubrication points in industrial gearboxes. Spheerol LZ is particularly suited for highly loaded rolling and plain bearings in a wet and dusty environment (e.g. universal joints, wheel hubs, sprockets, steering racks, etc.). The temperature range for this grease lies between - 20 °C and + 120 °C (for a short time even 130°C).

Your advantage! Price of CASTROL SPHEEROL LZ drops automatically in larger quantities.

Mobil Delvac 1 LE 5W-30

Vehicle Lube Motor oil

Fully Synthetic Heavy-Duty Diesel Engine Oil

Most important applications of Mobil Delvac 1 LE 5W-30 are:

• + Heavy Duty Diesel Engines including Euro V/VI and US EPA 2007/2010 Modern Low Emissions Vehicles, Utilizing Technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment

Pay attention! Price of Mobil Delvac 1 LE 5W-30 drops automatically with higher volumes.

FUCHS Cassida FM Grease HD 2

Specialty semi-synthetic heavy-duty greases for food and beverage processing equipment

Application FUCHS Cassida FM Grease HD 2

Recommended for use in machinery where frequent changes of the grease charge are required or there is high product consumption rate. Slow and medium speed plain and rolling element bearings. Heavy-loaded and shock-loaded applications. Joints, linkages and slides. Overhead track systems. May also be used as protective antitrust film and as release agent on gaskets and seals of tank closures.

Castrol Vecton Long Drain 10W-40 E6/E9

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E6/E9

Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E6/E9 drops automatically in larger quantities.

Q8 El Greco 220

CASTROL HYSPIN HVI 68 previously Castrol Vario HDX 68

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 68

Hyspin HVI 68 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 68 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 68 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 68 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 68 drops automatically in larger quantities.

CASTROL HYSPIN DSP 32

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 32

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 32 drops automatically in larger quantities.

CASTROL ALPHA SP 460 previous Energol GR XP 460

Gear oils DIN CLP 460

Application CASTROL ALPHA SP 460

The Alpha SP 460 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 460 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 460 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 460 is compatible with the most common types of seal materials.

Alpha SP 460 is classified as follows: DIN Classification is CLP 460.

Your advantage! Price of CASTROL ALPHA SP 460 drops automatically in larger quantities.

CASTROL HYSPIN HVI 100

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 100

Hyspin HVI 100 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 100 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 100 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 100 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 100 drops automatically in larger quantities.

Houghton Adrana A 3601.04

A water miscible metalworking fluid.

Properties

It is recommended for heavy-duty machining operations on low silicon content aluminium and is free of amines, boric acid, nitrite, chlorine and formaldehyde releasers.

Applications

Metals: “dirty” metals, such as cast iron.

• Usage: a wide range of machines, such as Kingsburys, Bullards, bar machines, lathes, chuckers, and centerless and cylindrical grinders.

• Processes: machining and grinding.

• Longer sump life.

• Heavy-duty.

• Non-foaming.