Klüber oil & grease lubricants

Klüber Klüberfood NH1 M 4-100

Fully synthetic high-performance oils for high-speed can closing machines

Application Klüber Klüberfood NH1 M 4-100

Lubrication of can seaming machines with either recirculating or total loss systems. Especially for those systems that have contamination of water or juice mixtures that need to be filtered. Circulating oil systems for bearings, chains and open gears on equipment in the food and beverage industry.

Klüber Klübersynth M 8-220

High-temperature oils for the glass industry

Application Klüber Klübersynth M 8-220

Klübersynth M 8-175 and Klübersynth M 8-220 are suitable for all IS machines. They can be used for all friction points in the normal and high-temperature sections which are lubricated through a centralised lubrication system. In addition, Klübersynth M 8-175 and Klübersynth M 8-220 are suitable for conveyor and cross belt chains which are lubricated by means of oil spray systems, drip oilers, centralised lubrication system, or by hand (oil feeder/brush).

Klüber Klüberalfa KR 3-730

Protecting and lubricating fluid for plug-in contacts

Application Klüber Klüberalfa KR 3-730

Klüberalfa KR 3-730 is suitable for the large-batch oiling of plug-in contacts of different shapes and materials which have to the meet high requirements in e.g. telecommunications, automation technology or car manufacture. In-house tests have shown that the protecting effect of Klüberalfa KR 3-370 is best on lead-free tin alloys. Optimum results are achieved with contact forces below 5 N.

Klüber Klüberbio LG 39-700 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-700 N

Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Klüber Klüberfluid C-F 8 Ultra

Operational lubricant for large girth gear drives

Application Klüber Klüberfluid C-F 8 Ultra

Klüberfluid C-F 8 ULTRA can be applied by immersion, transfer paddle wheel, pressure fed circulation and total loss spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 8 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are found in sugar and paper production as well as in the marine and offshore sector

Klüber Klüberfluid B-F 2 Ultra

Light-coloured running-in and correction lubricant for open gear rim/pinion drives

Application Klüber Klüberfluid B-F 2 Ultra

Klüberfluid B-F 2 Ultra is used for the running-in lubrication of new, open drives by means of immersion, transfer, circulation and spray lubrication, or for tooth flank correction of large gear drives that have been in use for some time. The use of Klüberfluid B-F 2 Ultra is not subject to any limitations regarding the size or power of the drives. A peripheral speed of 8.5 m/s should not be exceeded. Such drives are primarily to be found in rotary kilns, tubular mills and similar machinery in the cement, lime, gypsum and chemical industries and the mining sector. Klüberfluid B-F 2 Ultra must not be used for plain or rolling bearings.

Klüber GRAFLOSCON B-SG 00 ULTRA

Running-in lubricant for open drives

Application Klüber GRAFLOSCON B-SG 00 ULTRA

GRAFLOSCON B-SG 00 ULTRA was especially developed for specific running-in of open gears in rotary kilns, tube mills, and line blenders used in the cement, lime, gypsum, mining and

Klüber Klüberfluid C-F 7 Ultra

Operational lubricant for large, open girth gear drives

Application Klüber Klüberfluid C-F 7 Ultra

Klüberfluid C-F 7 Ultra can be applied by immersion, transfer paddle wheel, circulation or spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 10 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are in sugar and paper production as well as in the marine and offshore sector.

Klüber Klüberfood NH1 M 4-220

Fully synthetic high-performance oils for high-speed can closing machines

Application Klüber Klüberfood NH1 M 4-220

Lubrication of can seaming machines with either recirculating or total loss systems. Especially for those systems that have contamination of water or juice mixtures that need to be filtered. Circulating oil systems for bearings, chains and open gears on equipment in the food and beverage industry.

Klüber Summit PGS 150

Synthetic gas compressor oils

Application Klüber Summit PGS 150

Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.

Klüber Summit PGI 100

Synthetic gas compressor lubricants

Application Klüber Summit PGI 100

Klüber Summit PGI compressor lubricants are designed for rotary screw and piston compressors used in the compression of propane. They are also suitable for refrigeration compressors where propane is the refrigerant. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representatives for specific viscosity recommendations.

Klüber Summit PGS 100

Synthetic gas compressor oils

Application Klüber Summit PGS 100

Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.

Klüber Hotemp Super N

High-temperature oil for continuous particle board presses

Application Klüber Hotemp Super N

In the woodworking industry We have already gained vast, positive experience with the application of HOTEMP SUPER N in double-belt presses for the continuous production of fibre and particle boards or laminates, especially in the following systems: – ContiRoll® of Messrs. Siempelkamp – Conti-Panel-System of Messrs. Dieffenbacher – küsters press® of Messrs. Metso/Küsters These double-belt presses operate at high pressures and very high temperatures (>200 °C). The most complex lubrication points on the moving parts in the heating and compression area are: – steel belts, carpets of calibrated rollers, heating platens – roller bar chains – contact pressure and aligning chains – steel belts, beds of roller chains, heating platens Friction points, i.e. steel belts/roller bars or chain carpets are fully exposed to the heating/compressing temperature. Due to the thermal radiation, the other chains are subject to temperatures ranging from approx. 150 to 180 °C.

Klüber Hotemp Super M 121 S

High-temperature oil for the lubrication of roller bar chains

Application Klüber Hotemp Super M 121 S

HOTEMP SUPER M 121 S is recommended and used for the lubrication of roller bar chains in Conti-Roll presses of Messrs. Siempelkamp.

Klüber BARRIERTA L 55/3

High-temperature long-term greases

Application Klüber BARRIERTA L 55/3

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include:

• conveyors (load and turn rollers)
• kiln cart wheel bearings
• calender bearings
• fan bearings
• chain bearings in film stretching stenters

Klüber Klüberbeta RM 47-291

Special grease for elastomers and plastics

Application Klüber Klüberbeta RM 47-291

Klüberbeta RM 47-291 is primarily used for the lubrication of sealing elastomers. In such applications it attains minimum friction coefficients even at low temperatures. The product also shows good compatibility with a multitude of materials and good stability at high temperatures. Exemplary fields of application are O-ring seals in pneumatic equipment in cars.