Viskositaet

CASTROL Optileb HY 32

Food grade hydraulic oils

Application CASTROL Optileb HY 32

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

Mobil SHC Gargoyle 32 previously Mobil EAL Arctic 32

Refrigeration compressor oils

Application Mobil SHC Gargoyle 32

Application considerations: Mobil SHC Gargoyle 32 oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil SHC Gargoyle 32 oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

Mobil EAL Arctic 46

Refrigeration compressor oils

Application Mobil EAL Arctic 46

Application considerations: Mobil EAL Arctic Series oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil EAL Arctic Series oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

CASTROL Optileb GT 320

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 320

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

Cassida Fluid HF 46 Previous Name: Shell Cassida 46

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 46 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 46 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 46 drops automatically in larger quantities.

Cassida Fluid HF 32 Previous Name: Shell Cassida 32

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 32 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 32 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 32 drops automatically in larger quantities.

CASTROL Optileb GT 220

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 220

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Spheerol™ BNS 2

High temperature bearing grease

Application CASTROL Spheerol™ BNS 2

Spheerol BNS 2 is suitable for the lubrication of bearings at high temperatures, such as soot blower bearings, in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, etc. Spheerol BNS 2 can be used at a temperature range of -20ºC to +150ºC, and for short periods at a temperature range of up to +220ºC. Frequent re-greasing or grease change should be considered subject to application requirements.

Your advantage! Price of CASTROL Spheerol™ BNS 2 drops automatically in larger quantities.

CASSIDA FLUID GL 220 

Gear lubricants for use in food manufacturing equipment

CASSIDA FLUID GL 220 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

CASSIDA FLUID GL 220 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage: Price of CASSIDA FLUID GL 220 drops automatically in larger quantities.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

Cassida Fluid GL 320

Gear lubricants for use in food manufacturing equipment

Cassida Fluid GL 320 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 320 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 320 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 320 drops automatically in larger quantities.

Cassida Fluid DC 32

Speciality direct contact fluid for food processing applications in the food manufacturing industry

Cassida Fluid DC 32 main applications:

• Absorber oil for edible oil extraction plant solvent recovery systems.
• Forming oil for the manufacture of both two and three piece cans for food and beverages.
• Heat transfer systems in the food industry with a bulk oil temperature range of approximately -30°C to +280°C where the surface temperature of the heating elements (oil film temperature) should not exceed +320°C.

Cassida Fluid DC 32 is a multipurpose fluid designed for a number of special applications in the food manufacturing industry, including absorber oil for edible oil solvent recovery systems, canforming and closed circuit/pressureless heat transfer systems. Cassida Fluid DC 32 has been specially developed to meet the stringent requirements of the food industry. Cassida DC 32 is based on a careful blend of synthetic fluids chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid DC 32 drops automatically in larger quantities.

Cassida Fluid HFS 46

Synthetic hydraulic fluids for food and beverage processing equipment

CASSIDA FLUID FLUID HFS 46 are high performance, anti-wear multi-purpose lubricants with boosted solvency, specially developed for use in machinery used in the food and beverage processing and packaging industry. Cassida Fluid HFS 46 Applications are:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

CASSIDA FLUID CR 46

Compressor lubricants for food manufacturing machinery

CASSIDA FLUID CR 46 main applications:

• Screw and vane compressors
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes

CASSIDA FLUID CR 46 are high performance fluids specially developed for use in rotary screw and vane air compressors used in the food and beverage processing and packaging industry. CASSIDA FLUID CR 46 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of CASSIDA FLUID CR 46 drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/320

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/320

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL Optigear Synthetic 800/220

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/220

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/220 drops automatically in larger quantities.