Viskositaet

Synthetic industrial gear oil 320 (ISO VG)

Mobil SHC Gear 320 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 320 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 320 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 320 drops automatically with higher volumes.

RENOLIN PG 460

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 460 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

CASTROL Alphasyn T 46

Synthetic gear oil

Application CASTROL Alphasyn T 46

Alphasyn T grades have been formulated for use in bearings, circulatory systems and moderately-loaded gear systems operating at both high and low temperatures. Alphasyn T should not be used for heavy / shock loaded systems. Alphasyn T is suitable for various applications where a lubricating oil is used under extremes of temperature or variable temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity / temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Your advantage! Price of CASTROL Alphasyn T 46 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 220

Synthetic Gear Oil

Application CASTROL ALPHASYN T 220

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 220 drops automatically in larger quantities.

Klübersynth GH 6-320

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-320

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Mobil SHC Gear 3200

Gear Oils

Application Mobil SHC Gear 3200

Application Considerations: While the Mobil SHC Gear 1500, 3200, and 6800 are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear 1500, 3200, or 6800 lubricants, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC Gear 1500, 3200, and 6800 oils are recommended for all types of enclosed steel-on-steel gear drives. They are suitable for both circulation and splash lubrication systems. They are particularly recommended for gear sets operating under heavy or shock loads and low speeds where boundary lubrication may prevail. Applications for this product family are: Mobil SHC Gear 1500, 3200 and 6800 - Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units. Mobil SHC Gear 1500, 3200 and 6800 - Plain and rolling element bearings, especially in slow speed, and/or high load applications. Mobil SHC Gear 3200 and 6800 - Railroad DC Traction Motor drives. Mobil SHC Gear 3200 and 6800 - Certain open gear applications such as oiling pinions or specially designed circulation systems.

Mobil SHC Gargoyle 32 previously Mobil EAL Arctic 32

Refrigeration compressor oils

Application Mobil SHC Gargoyle 32

Application considerations: Mobil SHC Gargoyle 32 oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil SHC Gargoyle 32 oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Mobil EAL Arctic 46

Refrigeration compressor oils

Application Mobil EAL Arctic 46

Application considerations: Mobil EAL Arctic Series oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil EAL Arctic Series oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

CASTROL Optileb HY 32

Food grade hydraulic oils

Application CASTROL Optileb HY 32

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

CASTROL Optileb HY 46

Food grade hydraulic oils

Application CASTROL Optileb HY 46

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

Cassida Fluid HF 32 Previous Name: Shell Cassida 32

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 32 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 32 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Cassida Fluid HF 46 Previous Name: Shell Cassida 46

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 46 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 46 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

CASSIDA FLUID GL 220 

Gear lubricants for use in food manufacturing equipment

CASSIDA FLUID GL 220 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

CASSIDA FLUID GL 220 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage: Price of CASSIDA FLUID GL 220 drops automatically in larger quantities.

Cassida Fluid GL 320

Gear lubricants for use in food manufacturing equipment

Cassida Fluid GL 320 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 320 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 320 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 320 drops automatically in larger quantities.

Cassida Fluid DC 32

Speciality direct contact fluid for food processing applications in the food manufacturing industry

Cassida Fluid DC 32 main applications:

• Absorber oil for edible oil extraction plant solvent recovery systems.
• Forming oil for the manufacture of both two and three piece cans for food and beverages.
• Heat transfer systems in the food industry with a bulk oil temperature range of approximately -30°C to +280°C where the surface temperature of the heating elements (oil film temperature) should not exceed +320°C.

Cassida Fluid DC 32 is a multipurpose fluid designed for a number of special applications in the food manufacturing industry, including absorber oil for edible oil solvent recovery systems, canforming and closed circuit/pressureless heat transfer systems. Cassida Fluid DC 32 has been specially developed to meet the stringent requirements of the food industry. Cassida DC 32 is based on a careful blend of synthetic fluids chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid DC 32 drops automatically in larger quantities.