Industry & Manfacturing lubricants

TOTAL CERAN XM 220

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease.

Applications CERAN XM 220

• CERAN XM 220 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds.
• CERAN XM 220 is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• CERAN XM 220 is suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills and all industrial applications under severe conditions (wet, loaded, high temperature, dust,…)
• CERAN XM 220 is suitable for use in centralized greasing systems.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Your advantage! Price of TOTAL CERAN XM 220 drops automatically in larger quantities.

TOTAL CIRKAN RO 100

R and O type machine oils.

Applications CIRKAN RO 100

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 100 drops automatically in larger quantities.

Shell Gadus S3 T220 2 Previous Name: Stamina Grease EP 2

Premium Multipurpose Extreme Pressure Grease

Shell Gadus S3 T220 2 main applications:

• General Engineering, Steel, Paper, Aluminium, Chemical and many others. Recommended as an extreme pressure grease for highly loaded ball, roller & plain bearing applications at high temperatures where extended service life is required. Proven in the following applications:
• Hot strip mills
• Paper mill bearings (dry end)
• Electrical motors (large) In steel plate applications we recommend the Zn free Gadus S3 T150J.
   

Please note!! Price of Shell Gadus S3 T220 2 drops automatically in larger quantities.

CASTROL Transmax DEX-VI MER LV

Automatic Transmission Fluid

Application CASTROL Transmax DEX-VI MER LV

This product is additionally suitable for use in power steering systems where the use of any Dexron specification or Mercon LV fluid is permitted.

Shell Morlina S2 B 220 Previously Morlina 220

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 220 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 220 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 220 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 220 drops automatically with larger quantities.

Shell Omala S2 GX 100 

Industrial Gear Oils

Shell Omala S2 GX 100 main applications:

• Enclosed industrial gear systems Shell Omala S2 GX 100 technology provides an effective extreme pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel-on-steel, spur, helical, or planetary gear drives, including highly loaded systems with splash or forced circulation systems. Shell Omala S2 GX 100 oils are also suitable for the lubrication of non-geared applications, that include bearings and other steel-on-steel components with splash or forced circulation systems.
• Other applications Shell offers a wide range of products for other gear applications that have their own specific requirements.
  
  

Shell Omala S2 GX 100 are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints, combine to offer excellent performance in enclosed gear applications.

Please note!! Price of Shell Omala S2 GX 100 drops automatically in larger quantities.

Mobilgear 600 XP 220

Mobil Gear Oils

Mobil Gear Oils

Most important applications of Mobilgear 600 XP 220 are:

• + Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• + Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• + Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds.
• + Mobilgear 600 XP 220 is approved by Siemens AG for use in Flender gearboxes

Pay attention! Price of Mobilgear 600 XP 220 drops automatically with higher volumes.

Shell Heat Transfer Oil S2 Previous Name: Shell Thermia B

High-Performance Heat Transfer Fluid

Shell Heat Transfer Oil S2 main applications:

• Enclosed circulated heat transfer systems for industrial applications such as process industry, chemical plants, textile producers etc. and in household equipment such as oil filled radiators.
• Shell Heat Transfer Oil S2 can be used in high-temperature continuous heat transfer equipment with the following application limits: Max.
  Bulk temperature: 320oC
  Max. film temperature: 320oC
   

Shell Heat Transfer Oil S2 is based on carefully selected, highly refined mineral oils chosen for their ability to provide superior performance in indirect closed fluid heat transfer systems.
For open systems we advise you to use an other oil.

CASTROL Transmax Manual FE 75W previously Syntrans FE 75W

Fuel Efficient Manual Transmission Fluid

TOTAL EQUIVIS AF 46

High viscosity index hydraulic oils.

Applications TOTAL EQUIVIS AF 46

EQUIVIS AF is a “zinc-free” high performance hydraulic fluid for:

• all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points).
• hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature (-30°C) and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS AF 46 drops automatically in larger quantities.

TOTAL EQUIVIS D 46

Detergent hydraulic oil with a high viscosity index

Applications TOTAL EQUIVIS D 46

Any hydraulic system where significant amounts of water in the system cannot be prevented and when it is impossible to drain water. The detergent additive guarantees a high operational reliability even under unfavourable working conditions. High water content in particular. The high viscosity index ensures proper operation of the hydraulic system over a wide temperature range.

Your advantage! Price of TOTAL EQUIVIS D 46 drops automatically in larger quantities.

TOTAL EQUIVIS ZS 15

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 15

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 15 drops automatically in larger quantities.

Product Description Mobilfluid 424

RENOLIT CL X2

Water resistant, low temperature grease

RENOLIT CL X2 field of applications:

RENOLIT CL X2 is specifically designed for use in wet or low temperature conditions, including: - Industrial process equipment, Machine tools, Bearings, Tanks/amphibious craft, Lorries, Outboard motors.

Please note!! Price of RENOLIT CL X2 drops automatically in larger quantities.

Q8 da Vinci P 6

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release

Applications Q8 da Vinci P 6

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface

Q8 da Vinci P 6 is typically used for demoulding of: Prefab sewage pipes, On site elements

Your advantage! Price of Q8 da Vinci P 6 drops automatically in larger quantities.

Q8 Hoffmeister 46

Zinc- and detergent-based hydraulic oil with high viscosity index

Applications Q8 Hoffmeister 46

Q8 Hoffmeister 46 is perfect for usage for hydraulic systems in off-road applications and mobile construction equipment. Thanks to its detergent functionalities, this oil is the ideal solution for hydraulic systems where water and pollution can be a problem. It can be used in the most extreme temperatures: from high to low.

Your advantage! Price of Q8 Hoffmeister 46 drops automatically in larger quantities.

Q8 Rembrandt EP 2

Applications Q8 Rembrandt EP 2

Multi-purpose grease with EP properties for industrial and automotive applications Din 51502 Kpf2 N-25.

Recommended for highly loaded plain- and anti-friction bearings in: draglines, bulldozers, tractors, excavators, trucks, hoisting equipment, winches etc.

Your advantage! Price of Q8 Rembrandt EP 2 drops automatically in larger quantities.

TOTAL MULTIS EP 1

Multi purpose extreme pressure lithium/calcium grease.

Applications TOTAL MULTIS EP 1

• MULTIS EP 1 is a true multi purpose grease, formulated for lubrication of loaded slide-balland roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
• Suitable as general purpose grease for industrial applications requiring a NLGI 1 grade Extreme Pressure grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL MULTIS EP 1 drops automatically in larger quantities.

Q8 Mahler HA SAE 40

High ash gas engine oil

Your advantage! Price of Q8 Mahler HA SAE 40 drops automatically in larger quantities.

TOTAL MULTIS COMPLEX EP 3

Multi pressure lithium complex grease for high temperatures

Application TOTAL MULTIS COMPLEX EP 3

TOTAL MULTIS COMPLEX EP is designed for the lubrication of various applications in all types of operating conditions, but especially where operating temperatures are high and the use of conventional lithium greases is limited. TOTAL MULTIS COMPLEX EP is a true “multipurpose” grease, developed for the lubrication of loaded plain, ball and roller bearings, wheel bearings, lubrication points, chassis and various shock-loaded or vibrating applications in transport, agricultural and earth-moving machinery. Suitable as a general high-pressure grease for industrialële applications requiring a grease resistant to elevated temperatures. Always avoid contamination of the grease by dust and/or dirt during application. Preferably use a pneumatic pumping system or cartridges.