Industry & Manfacturing lubricants

Mobil Rarus SHC 1026

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1026 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1026 drops automatically with larger quantities.

Mobil SHC 636

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 636 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 636 is approved by Siemens AG for use in Flender gearboxes
   

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

Mobil SHC 639

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 639 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 639 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 639 drops automatically with higher volumes.

Mobil SHC 634

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 634 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 634 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 634 drops automatically with higher volumes.

GEARMASTER LXG 00

Synthetic oil-based, semi-fluid gear grease

GEARMASTER LXG 00 field of applications:

GEARMASTER LXG 00 is used for high-performance gearboxes. The product is compatible with seals and does not affect yellow metals and aluminium. It is suitable for the use in central lubrication systems of commercial vehicles and as a sealing grease in shock absorbers.

GEARMASTER LXG 00 method of applications:

Gearboxes can be filled with GEARMASTER LXG 00 manually or by central filling systems. Please observe the manufacturers’ recommendations concerning filling capacities.

Please note!! Price of GEARMASTER LXG 00 drops automatically in larger quantities.

RENOLIN PG 220

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 220 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

Please note!! Price of RENOLIN PG 220 drops automatically in larger quantities.

GLEITMO 810

White paste for assembly and re-lubrication of highly loaded machine elements

GLEITMO 810 field of applications:

GLEITMO 810 is used for assembly and relubrication of machine elements (not for roller bearings) which are subjected to high pressure, shock loads and vibrating or oscillating movements. To reduce friction and wear at high and low loads. Against fretting corrosion and stick-slip and to prevent seizing of stainless steel connections. Wherever cleanliness is vital: Household appliances, textile, office, filling and packaging machines, hinges and fittings of many different types.

GLEITMO 810 method of applications:

Apply GLEITMO 810 to the surface (which should be clean if possible) using a rigid brush or a lint-free cloth. Otherwise it can also be applied using grease guns or grease feed devices, as usual with greases.

Please note!! Price of GLEITMO 810 drops automatically in larger quantities.

Synthetic industrial gear oil 150 (ISO VG)

Mobil SHC Gear 150 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 150 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 150 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 150 drops automatically with higher volumes.

Synthetic industrial gear oil 460 (ISO VG)

Mobil SHC Gear 460 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 460 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 460 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 460 drops automatically with higher volumes.

Q8 da Vinci AM 4

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release.

Applications Q8 da Vinci AM 4

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface.

Q8 da Vinci AM 4 is typically used for demoulding of prefab concrete foundation piles and on-site elements

Your advantage! Price of Q8 da Vinci AM 4 drops automatically in larger quantities.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

CASTROL ALPHASYN EP 150

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 150

The Alphasyn EP 150 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 150 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 150 drops automatically in larger quantities.

CASTROL ALPHASYN EP 150

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 150

The Alphasyn EP 150 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 150 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production. The use of a PAO base stock provides an inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range.

The Alphasyn EP 150 is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn EP 150 is classified as follows: DIN Classification is CLP 150

Your advantage! Price of CASTROL ALPHASYN EP 150 drops automatically in larger quantities.

CASTROL ALPHASYN EP 220

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 220

The Alphasyn EP 220 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 220 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 220 drops automatically in larger quantities.

CASTROL ALPHASYN EP 220

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 220

The Alphasyn EP 220 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 220 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 220 drops automatically in larger quantities.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

LAGERMEISTER BF 2

Multifunctional lithium soap rope grease with EP properties, for roller and plain bearings.

LAGERMEISTER BF 2 field of applications:

Ideally suited for all roller and plain bearings on construction machinery under severe operating conditions. At all lubrication points and excavators: including ball slewing rings, hydraulic grippers Loader: equipment and hinged joints Crawler boxes: equipment and hinged joints Crawler boxes: equipment and control levers Grader: central swivel head scraper: including lift Dump truck/truck: all lubrication points Tower cranes: including ball swivel heads Rolls: tandem and trailer rollers Security installations: dry and wet screening installations Millers: on extraction and processing machines Construction, stone, soil, etc...: Gravel works, quarries, mobile recycling plants, etc.

LAGERMEISTER BF 2 method of applications:

LAGERMEISTER BF 2 can be used by hand, by suitable grease guns, by central lubrication systems or the SYSTEM CLEANER.

Please note!! Price of LAGERMEISTER BF 2 drops automatically in larger quantities.

Synthetic industrial gear oil 220 (ISO VG)

Mobil SHC Gear 220 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 220 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 220 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 220 drops automatically with higher volumes.