Buy Lubricants — mineral, synthetic, dry & adhesive

TOTAL CERAN XS 80

Very low temperature synthetic calcium sulfonate complex grease - Extreme-pressure

Applications CERAN XS 80

• CERAN XS 80 is a synthetic heavy duty extreme pressure grease, specially designed for applications working under very low temperatures conditions
• CERAN XS 80 is pre-eminently suitable for lubrication of industrial, and ‘heavy duty’ off-road applications working in very low temperature environments.
• CERAN XS 80 is also used as a protection grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL CERAN XS 80 drops automatically in larger quantities.

Aeroshell Oil W 15W-50

Semi-synthetic lubricating oil for aircraft piston engines.

Application Aeroshell Oil W 15W-50

AeroShell Oil W 15W-50 is intended for use in certified fourstroke cycle aircraft piston engines. AeroShell Oil W 15W-50 is superior to single grade oils in almost every application. It offers easier starting, better lubrication after start-up, reduced wear, reduced corrosion and rusting, and improved cleanliness with oil pressures and temperatures equal to that of single grade SAE 50 oils at fully warmed up conditions. The anti-corrosion additive system is designed to prevent rust or corrosion in all types of aircraft piston engines. In comparative testing of camshaft rusting under high humidity conditions, AeroShell Oil W 15W-50 was almost entirely rust free while other camshafts conditioned on other oils showed sometimes heavy rusting on cam lobes and bearing surfaces.These results indicate that AeroShell Oil W 15W-50 can provide maximum anti-corrosion protection for aircraft piston engines, when combined with proper maintenance practices and proper operating conditions. Because of the improved flow characteristics of AeroShell Oil W 15W-50, operators may observe slightly lower oil temperatures in some aircraft. On larger aircraft, the oil cooler flap will normally compensate for this change. However, in small aircraft, oil temperature could be reduced slightly. Operators should always check the oil temperature to ensure that they are in the range specified by the manufacturer. Most manufacturers recommend cruising oil temperatures between 82 to 930C (180 to 2000 F). Oil temperatures significantly below this range can result in excessive water and fuel contamination in the crankcase.

Aeroshell Oil W100 Plus

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W100 Plus

The advanced additives in AeroShell Oil W100 Plus provide better rust and wear protection than conventional single grades. The additives work as a protective barrier to prevent critical parts from being slowly degraded by rust or wear, especially when an aircraft sits idle. This protection helps keep the camshaft and lifters coated, reducing the likelihood of premature damage and helping operators reach TBO.

Shell Omala S2 GX 220 (previously Omala 220, S2 G 220 or F 220)

Industrial gearbox oils ISO VG 220

Shell Omala S2 GX 220 is a high-quality extreme-pressure (EP) gearbox oil primarily designed for heavily loaded industrial gears. The excellent protection against high loads, the excellent protection against micro-pitting and compatibility with elastomers and paint offer superior performance in gears with closed sump.

Main uses of Shell Omala S2 GX 220 are:

• + Industrial gearboxes with closed sump
• + Heavily loaded systems with oil lubrication and circulation systems
• + Non-gear related applications (roller bearings and other (steel on steel) parts with splash or forced circulation systems).
  

Mobil DTE 25 Ultra (previously DTE25)

Mobil Industrial Hydraulic Oils

Most important applications of Mobil DTE 25 Ultra are:

• + Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• + Hydraulic systems requiring a high load-carrying capability and anti-wear
• + protection, and when thin oil-film corrosion protection is an asset
• + Where small amounts of water are unavoidable
• + Systems containing gears and bearings
• + Machines employing a wide range of components using various metallurgy

Mobil Univis™ N 46

Preservative

Application Mobil Univis™ N 46

• Univis N can be used in a wide range of applications, in industry, contracting and shipping.
• Systems with frequent cold start and high operating temperatures.
• Applications requiring anti-wear properties.
• Applications containing gears and bearings where mild anti-wear properties are required.
• Applications where high pressure loads occur and anti-wear properties are required.
• Applications where moisture is present and good corrosion protection is necessary.
• Machines where components of different metals and alloys are used.
  
  

Your advantage! Price of Mobil Univis™ N 46 drops automatically in larger quantities.

Mobil Agri Extra 10W-40

STOU oil for tractors with extra high performance

Super Tractor Oil Universal (STOU) oil

Mobil Agri Extra 10W-40 is a STOU oil with extra high performance. A multifunctional lubricant for most agricultural machines and agricultural applications.

Key applications of mobil Agri Extra 10W-40 are:

• + Diesel and petrol engines
• + Transmissions
• + Final drives
• + Wet brakes
• + Hydraulics

Mobil Agri Extra 10W-40 lubricant is recommended for use in a wide range of extreme operating conditions in the agricultural sector.

Your Advantage: Price mobil Agri Extra 10W-40 drops automatically with larger quantities.

Mobil™ Agri Extra 10W-40

Super Tractor Oil Universal (STOU) Lubricant

Applications Mobil™ Agri Extra 10W-40

Agricultural vehicles and equipment powered by both diesel and gasoline engines. Gearboxes in agricultural equipment and food systems requiring multi-purpose fluids

Shell Helix Ultra Professional AP-L 0W-30

Fully Synthetic Motor Oil - Tailored to meet engine manufacturer special requirements

Application Shell Helix Ultra Professional AP-L 0W-30

Shell Helix Ultra Professional AP-L 0W-30 for gasoline and diesel engines meets the technically challenging Peugeot B71 2312 in-house specification required in the latest Peugeot vehicles. To comply with Euro 6 regulations, it is formulated specifically for use in modern diesel engines using diesel particulate filter (DPF) technology and gasoline engines with three way catalytic converters (TWC).

Q8 Hyaydn 15

Applications 

Q8 Haydn 15 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 15 

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive 

Long service life due to high thermal and oxidation stability for high temperature applications 

Q8 Haydn 15 guarrantees trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics 

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears 

Q8 Holst 46

Applications Q8 Holst 46

Zinc-free and ashless hydraulic product to be used in hydraulic systems equipped with fine filters, or systems not compatible with zinc based anti-wear hydraulic oils

Your advantage! Price of Q8 Holst 46 drops automatically in larger quantities.

TOTAL CIRKAN RO 100

R and O type machine oils.

Applications CIRKAN RO 100

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 100 drops automatically in larger quantities.

TOTAL CIRKAN RO 150

R and O type machine oils.

Applications CIRKAN RO 150

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 150 drops automatically in larger quantities.

Klüber Klüberplex BEM 41-141

Lubricant for rolling and plain bearings subject to high loads

Application Klüber Klüberplex BEM 41-141

Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations. Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

Klüber Klüberplex BEM 41-141 is particularly widely used in the wind industry for wind turbines.

Shell Omala S2 GX 150

Industrial Gear Oils

Shell Omala S2 GX 150 main applications:

• Enclosed industrial gear systems Shell Omala S2 GX 150 technology provides an effective extreme pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel-on-steel, spur, helical, or planetary gear drives, including highly loaded systems with splash or forced circulation systems. Shell Omala S2 GX150 oils are also suitable for the lubrication of non-geared applications, that include bearings and other steel-on-steel components with splash or forced circulation systems.
• Other applications Shell offers a wide range of products for other gear applications that have their own specific requirements.
  

Shell Omala S2 GX 150 oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints, combine to offer excellent performance in enclosed gear applications.

Please note!! Price of Shell Omala S2 GX 150 drops automatically in larger quantities.

Q8 Haydn 10

Applications 

Q8 Haydn 10 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 10 

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive 

Long service life due to high thermal and oxidation stability for high temperature applications 

Q8 Haydn 10 guarantees a trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics 

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears 

Shell Tellus S2 V22 (Formerly Shell Tellus T22) has been improved and is now called Shell Tellus S2 VX22 !

Hydraulic oil ISO VG22 with wide temperature range

Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Examples of application of Shell Tellus S2 VX 22 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Pay attention! Price falls automatically for larger quantities.

Shell Sirius S4 15W-40 (previous Sirius 15W40)

High Performance High speed diesel engine oil

Shell Sirius S4 15W-40 main applications:

• High speed propulsion engines
  For example coastal vessels, fishing trawlers, rescue boats and lifeboats.
• High speed engined generators.
  
  

Shell Sirius S4 15W-40 is a high performance diesel engine lubricant for modern high speed engines burning distillate fuels

Klüber Klüberoil GEM 1-220 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-220 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

TOTAL EQUIVIS ZS 68

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 68

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 68 drops automatically in larger quantities.