Buy Lubricants — mineral, synthetic, dry & adhesive

Shell Gadus S3 A1300C 2 Previous name Shell SRS 4000

High quality heavy duty grease

Application Shell Gadus S3 A1300C 2

• + Shell Gadus S3 A1300C is designed for the lubrication of heavily loaded magazines and rolling bearings that operate in wet condition. environment, e.g. off-road equipment and vehicles, forestry, etc. and agricultural machinery, marine and offshore.
  
• + Fifth wheels
  
• + Pins
  
• + Buses
  
• + Joints
  
• + Cranes
  
• + Strong duct profiles/seals, shark basin, trawl winches, and general maintenance of machinery and equipment on deck the marine and offshore environment.
  
  

Shell Gadus S3 A1300C is a calcium grease based on anhydrous calcium soaps and high viscous mineral oils, containing antioxidants, rest inhibitors, EP and Anti-Wear additives. The grease has an excellent adhesion force, is very water repellant and has the ability to withstand severe shock loads.

Your advantage! Price of Shell Gadus S3 A1300C 2 drops automatically in larger quantities.

Shell Gadus Fifth Wheel Grease

For Heavy-Duty Tractor and Trailer Couplings

Main applications of Shell Gadus Fifth Wheel Grease are:

• Specifically developed for lubricating the fifth wheel coupling between tractor and trailer
  
• Highly suitable for heavily loaded and constantly sliding surfaces
  
• Provides effective protection against water and corrosion

Shell Gadus Fifth Wheel Grease offers excellent load carrying capability due to its high base oil viscosity and contains solids to withstand shock loads. The grease structure remains stable, prevents leakage and ensures a long-lasting lubricating film under extreme operating conditions.

Mobil ATF 3309

Automatic Transmission Fluid

Application Mobil ATF 3309

Mobil ATF 3309 is recommended for use in transmissions requiring fluids of JWS 3309 or GM 9986195 quality levels. It is also recommended for service fill applications where Toyota T-IV or T4, T-III or T3 are called for. Please refer to the owners' manual for proper fluid requirements.

Mobil DTE 27 Ultra previously DTE27

Mobil Industrial Hydraulic Oils

Most important applications of Mobil DTE 27 Ultra are:

• + Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• + Hydraulic systems requiring a high load-carrying capability and anti-wear
• + protection, and when thin oil-film corrosion protection is an asset
• + Where small amounts of water are unavoidable
• + Systems containing gears and bearings
• + Machines employing a wide range of components using various metallurgy

Mobilgear 600 XP 320

Mobil Gear Oils

Mobil Gear Oils

Most important applications of Mobilgear 600 XP 320 are:

• + Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• + Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• + Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds.
• + Mobilgear 600 XP 320 is approved by Siemens AG for use in Flender gearboxes

Pay attention! Price of Mobilgear 600 XP 320 drops automatically with higher volumes.

Shell Tellus S3 M 32

Premium Zinc-Free Industrial Hydraulic Fluid

Shell Tellus S3 M 32 main applications:

• Manufacturing and industrial hydraulic systems
• Severe duty hydraulic service
• Marine and mobile hydraulic systems
• Low toxicity towards the environment

Specifications, Approvals & Recommendations

Shell Tellus S3 M 32 fluids are suitable for use with most hydraulic pumps. ·Denison Hydraulics (HF-0, HF-1 and HF-2) Eaton Vickers (Brochure 694) ·Fives Cincinnati P-68 (ISO 32) ·ISO 11158 (HM fluids) ·DIN 51524-2 (HLP oils) ·ASTM 6158 (HM mineral oils) SS 15 54 34 M

Pay attention! Price of Shell Tellus S3 M 32 drops automatically in larger quantities.

CASTROL ALPHA SP 220

Gear oils DIN CLP 220

Application CASTROL ALPHA SP 220

The Alpha SP 220 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The castrol Alpha SP 220 additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 220 is compatible with the most common types of seal materials.

Alpha SP 220 is classified as follows: DIN Classification is CLP 220

Your advantage! Price of CASTROL ALPHA SP 220 drops automatically in larger quantities.

Houghton Rust Veto DW 162 (formerly Shell Ensis DW 162)

Short-term rust inhibitor with dewatering capacity for short protection duration

Rust Veto DW 162 is a rust inhibitor with a short protective duration suitable for protection during storage or use of metal surfaces that are susceptible to corrosion. Rust Veto DW 162 is a solvent-based anti-corrosion agent with water-displacing properties. It protects metal surfaces against the harmful effects of moisture, air, detergents and other contaminants. Rust Veto DW 162 quickly expels water, moisture and other contaminants from the surfaces to be protected.

Main features of Houghton Rust Veto DW 162 (formerly Shell Ensis DW 162) are:

• + Protection duration: Indoor: 2 weeks to 1 month and Outdoor (under roof): not recommended
• + Easy to remove with alkaline or solvent-based cleaners
• + Leaves practically no film
• + Short drying time
   

Please note ! Price Houghton Rust Veto DW 162 drops automatically with larger quantities.

Q8 Rubens WB /b

Lithium complex extreme pressure grease

Applications Q8 Rubens WB /b

Q8 Rubens WB/b is used in industrial and automotive applications. It is highly recommended for heavily loaded plain- and anti-friction bearings, bushings and pins in industrial applications, off-highway equipment, construction equipment, automotive equipment (Volvo standard 97720), marine applications and agriculture equipment.

Your advantage! Price of Q8 Rubens WB /b drops automatically in larger quantities.

Shell Spirax S2 A 80W-90 Previous Name: Shell Spirax A 80W-90

High quality, GL-5 axle oil

Shell Spirax S2 A 80W-90 main applications:

• Automotive transmissions, differentials
• Moderate to heavily loaded gear sets in stationary and ancillary equipment
• Hypoid gear axles
• Motorcycle gear units separate from the engine

Other automotive transmission units operating under high speed/shock load, high speed/low torque and low speed/high torque conditions.

Please note!! Price of Shell Spirax S2 A 80W-90 drops automatically in larger quantities.

Mobil MOBILTHERM 603

Heat transfer Oils

Applications Mobil MOBILTHERM 603

Mobiltherm heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.

Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.

Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.

TOTAL CERAN XM 220 Moly

Extreme-pressure calcium sulfonate complex grease containing 5% of MoS2.

Applications CERAN XM 220 Moly

• CERAN XM 220 Moly is a mineral oil , heavy duty, extreme pressure grease containing 5% of MoS2.
• CERAN XM 220 Moly is designed for mining applications in temperate environments.
• CERAN XM 220 Moly is recommended for the lubrification of slow moving bearings and loaded rolling element bearings subject to shock loads and high temperatures
• CERAN XM 220 Moly is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges

Your advantage! Price of TOTAL CERAN XM 220 Moly drops automatically in larger quantities.

TOTAL NEVASTANE AW 68

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 68

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 68 drops automatically in larger quantities.

Shell Spirax S3 TLV

Premium, Low Viscosity SAE 5W-20, Tractor Transmission and Hydraulic Oil

Application Shell Spirax S3 TLV

Suitable for applications allowing SAE 5W-20 oil in transmission, wet brake and hydraulic systems particularly designed for tractors and ancillary equipment.

Tractors and other equipment using a common fluid to lubricate the transmission, differential and hydraulic systems.

Caterpillar powershift transmissions requiring a TO-2 Fluid.

Mobile equipment using Sundstrand hydrostatic transmissions

Mobile and industrial hydraulic systems operating over a wide temperature range.

Shell Gadinia AL 30

Advanced Lubricant for ship medium speed trunk-piston engines running on distillate fuel.

Shell Gadinia AL 30 main applications:

• Highly rated medium speed diesel engines operating under high load or overload conditions.
• General ship application, including gears, where specialist lubricants are not required.

Shell GADINIA AL 30 is a premium quality marine diesel engine oil designed for use in medium speed trunk piston engines, which operate on distillate fuels. Shell GADINIA AL 30 is specially designed to control oil consumption in modern engines, where liner -lacquering is a potential problem. Being multifunctional Shell GADINIA AL 30 can also be used for other shipboard applications such as reduction gears.

Pay attention! Price of Shell Gadinia AL 30 drops automatically in larger quantities.

Shell Corena S2 P 100 Previously Corena P100

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 100 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 100 drops automatically with larger quantities.

Shell Corena S2 P 150 Previously Corena P150

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 150 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 150 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 150 drops automatically with larger quantities.

Shell Tellus S2 V100 (Formerly Shell Tellus T100) has been improved and is now called Shell Tellus S2 VX100 !

Hydraulic oil ISO VG100 with a wide temperature range

Examples of application of Shell Tellus S2 VX 100 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX 100 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX 100 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX100 Price falls automatically for larger quantities.

Shell Turbo Oil T 68

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 68 main applications:

Shell Turbo Oils T 68 are available in ISO grades 32, 46, 68 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 68 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 68 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 68 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 68 drops automatically in larger quantities.