Industry & Manfacturing lubricants

Shell Tellus Zinc Free S3 VX 46 Previous Name: Tellus S3 V 46 and STX 46

Premium Zinc-Free Hydraulic Fluid for Wide Temperature Ranges

Main applications of Shell Tellus Zinc Free S3 VX 46 are:

• Mobile and industrial hydraulic applications
  
• Hydraulic systems exposed to extreme temperature fluctuations
  
• Exceptional protection against wear and oxidation
  

Tellus S3 VX 46 provides long service life, excellent system cleanliness, and improved efficiency. Thanks to its zinc-free technology, the oil is more environmentally friendly and compatible with most seals and hydraulic pumps. At the bottom of this page, you can find all specifications and approvals of Shell Tellus Zinc Free S3 VX 46.

Shell Tellus S3 V 68 Previous Name: Tellus STX

Premium Zinc-Free Industrial Hydraulic Fluid for very wide temperature range

Shell Tellus S3 V 68 main applications:

• Mobile/exterior hydraulic applications
• Precision hydraulic systems
• Environmental impact

Shell Tellus S3 V 68 hydraulic fluids are high performance lubricants that use exclusive ashless technology, coupled with highly shear stable viscosity modifiers. 
Shell Tellus S3 V68 give excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures. 
Shell Tellus S3 V 68 provide outstanding protection and performance in most mobile equipment and other applications subjected to a wide range of ambient or operating temperatures.

Please note!! Price of Shell Tellus S3 V 68 drops automatically in larger quantities.

TOTAL EQUIVIS AF 46

High viscosity index hydraulic oils.

Applications TOTAL EQUIVIS AF 46

EQUIVIS AF is a “zinc-free” high performance hydraulic fluid for:

• all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points).
• hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature (-30°C) and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS AF 46 drops automatically in larger quantities.

Shell Rhodina Grease BBZ 

High performance, part- synthetic grease, for bearings subject to fretting and false brinelling

Shell Rhodina Grease BBZ main applications:

• Shell Rhodina Grease BBZ is designed for lubrication of specific bearings in wind turbines (e.g. blade bearings) and similar applications. Protection against fretting corrosion, moisture corrosion and false brinelling is provided.
• Shell Rhodina Grease BBZ can also be used in bearings operating at very low temperatures e.g. under artic conditions.

Shell Rhodina Grease BBZ is specifically designed for high demanding outdoor applications, in particular when protection against false brinelling and fretting corrosion is required – even at very low temperatures.

Mobil DTE Medium

High-quality circulation lubricants

Applications of Mobil DTE Medium are:

• + Recirculating lubrication systems for steam turbines on land and shipping, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in flat and roller bearings and in straight gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the temperatures on the pressure side 150& deg; C not exceed
  
  

The Mobil DTE Medium is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, but also for other systems that require a long lifetime of the lubricant. These products are formulated with very refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast water wash capacity and high protection against emulsification.

Your advantage: Price of Mobil DTE Medium drops automatically with higher volumes.

Mobil DTE Heavy-Medium

High quality circulation lubricants

Applications of Mobil DTE Heavy-Medium are:

• + Recirculating lubrication systems for land and marine steam turbines, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in plain and roller bearings and in spur gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the pressure side temperatures do not exceed 150°C
  
  

The Mobil DTE Heavy-Medium is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, as well as for other systems that require a long lubricant life. These products are formulated with highly refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast Wasserab separating capacity and a high protection against emulsification.

Shell Corena S2 P 100 Previously Corena P100

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 100 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 100 drops automatically with larger quantities.

Shell Corena S2 P 150 Previously Corena P150

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 150 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 150 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 150 drops automatically with larger quantities.

CASTROL Molub-Alloy OG 936 SF Heavy

Open gear compounds (solvent free)

Application CASTROL Molub-Alloy OG 936 SF Heavy

Molub-Alloy OG 936 SF Heavy is suitable for use on all types of open gears, racks and pinions and sliding or skidding applications such as draglines and shovels. It can be applied either manually or by heavy duty automatic systems. This product is used extensively in mining, construction, onshore drilling operations and on offshore installations, facilitating effective lubrication and protection on: Rack and pinion jacking mechanisms Cantilever skidding systems Mooring winch open gearing and slides FPSO offloading systems Crane slew ring & pinion Exposed threads on penstock valves Heavy duty top dressing for the ultimate protection of wire ropes Molub-Alloy OG 936 SF Heavy complies with the Bucyrus International SD 4713 specification (CAT) and Komatsu specifications for Open Gear Lubricants.

Your advantage! Price of CASTROL Molub-Alloy OG 936 SF Heavy drops automatically in larger quantities.

Shell Tellus S2 V100 (Formerly Shell Tellus T100) has been improved and is now called Shell Tellus S2 VX100 !

Hydraulic oil ISO VG100 with a wide temperature range

Examples of application of Shell Tellus S2 VX 100 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX 100 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX 100 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX100 Price falls automatically for larger quantities.

Shell Turbo Oil T 68

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 68 main applications:

Shell Turbo Oils T 68 are available in ISO grades 32, 46, 68 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 68 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 68 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 68 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 68 drops automatically in larger quantities.

TOTAL DACNIS 100

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 100

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 100 drops automatically in larger quantities.

ISOFLEX TOPAS L 32 N in 1 kilo

Special low-temperature greases

Most important applications of ISOFLEX TOPAS L 32 N are:

• + Designed for extremely low temperatures
• + Long Life grease
• + Contains a UV indicator
   

ISOFLEX TOPAS L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.

Mobil DTE 27 Ultra previously DTE27

Mobil Industrial Hydraulic Oils

Most important applications of Mobil DTE 27 Ultra are:

• + Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• + Hydraulic systems requiring a high load-carrying capability and anti-wear
• + protection, and when thin oil-film corrosion protection is an asset
• + Where small amounts of water are unavoidable
• + Systems containing gears and bearings
• + Machines employing a wide range of components using various metallurgy

TOTAL FINAVESTAN A 100 B

Medical White Oil

APPLICATIONS OF TOTAL FINAVESTAN A 100 B

FINAVESTAN A 100 B is used in the cosmetic and pharmaceutical industries whenever high-purity medical white oils are required.

Total FINAVESTAN A 100 B is also used as a plasticizer in polystyrene production and as an extending agent for thermoplastic elastomers, as well as a defoamer, protective film, and release agent. FINAVESTAN A 100 B is also used in the paper industry to lubricate blades during cutting and separating processes.

CASTROL HYSPIN DSP 46

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 46

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 46 drops automatically in larger quantities.

Shell Turbo Oil T 46

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 46 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 46 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 46 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 46 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

TOTAL DACNIS 32

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 32

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 32 drops automatically in larger quantities.

TOTAL CIRKAN RO 320

R and O type machine oils.

Applications CIRKAN RO 320

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 320 drops automatically in larger quantities.

TOTAL FINAVESTAN A 80 B

Vegetable demoulding oil for high temperatures.

Applications TOTAL FINAVESTAN A 80 B

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:

• Polymers: plasticizers & external lubricants for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
• Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
• Paper: cut and slit lubricant.
• Dust binder, defoamer, furniture polishes.

The following applications are subject to applicable laws and regulations in each country:

• Demoulding agent, defoamer and protective film in food industry
• Lubricants additive for food industry (Accidental food contact)
• Food processing aid (direct food contact).

• CAS number: 8042-47-5
• EINECS number: 232-455-8
• INCI number (EU): Paraffinum Liquidum.

Your advantage! Price of TOTAL FINAVESTAN A 80 B drops automatically in larger quantities.