Mobil oil & grease lubricants

Mobilube HD 85W140

Heavy Duty Automotive Gear Lubricants

Application Mobilube HD 85W140

Recommended by ExxonMobil for use in: Heavy duty axles and final drives requiring API GL-5 level performance Passenger cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail

Mobil ATF 134

Mobil Passenger Vehicle Lube

Automatic Transmission Fluid

Most important applications of Mobil ATF 134 are:

• + Mobil ATF 134 is recommended for use in the latest generation of Mercedes Benz 7-speed automatic transmission gearboxes. It is approved against MB 236.14.

Your advantage Price of Mobil ATF 134 drops automatically with higher volumes.

Mobil 1 Racing 2T

Advanced Performance, Full Synthetic Two-Stroke Engine Oil

Application Mobil 1 Racing 2T

Mobil 1 Racing 2T is recommended for lubrication of two-stroke engines used in the highest performance motorcycles, snowmobiles and lean oil/fuel ratio chain saws. It is ideal for applications where API TC or JASO FD performance standards are recommended. The product helps to provide outstanding performance even in some of the harshest operating conditions.

Mobil 1™ ESP X4 0W-40 formerly Mobil 1 ESP X3 0W-40

Advanced Fully Synthetic Engine Oil

Application of Mobil 1™ ESP X4 0W-40

Mobil 1 ESP X4 0W-40 is recommended for high-performance engines that require GPFs (Gasoline Particulate Filters). Mobil 1 ESP X4 0W-40 should only be used in vehicles for which it is approved.

Mobil 1 ESP X4 0W-40 is not suitable for Porsche vehicles that require C20, C30, or C40 GT-approved Mobil 1 engine oil. Mobil 1™ ESP X4 0W-40 should not be used in Porsche GT engines. There is a dedicated Mobil 1 product for GT engines, namely Mobil 1™ C40 GT 0W-40.

Mobil Univis HVI 13

Hydraulic Oils

Application Mobil Univis HVI 13

Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range. Hydrostatic transmissions and dash pots. They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated. To reduce deposit formation in equipment where close clearance servo-valves are used. Systems where cold start-up and high operating temperatures are typical. Systems requiring a high degree of load-carrying capability and anti-wear protection. Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

Mobil ATF SHC

Mobil Passenger Vehicle Lube

Superior Performance Synthetic Automatic Transmission Fluid

Most important applications of Mobil ATF SHC are:

• + Mobil ATF SHC is recommended by ExxonMobil for use in modern high performance transmissions operating in the severe, high-temperature, heavy load or cold climate applications. It is ideal for manual transmissions designed to operate with ATF fluids, where it will provide excellent gear shifting and protection under severe operating conditions.

Pay attention! Price of Mobil ATF SHC drops automatically with higher volumes.

Mobil Univis HVI 26

Hydraulic Oils

Application Mobil Univis HVI 26

Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range. Hydrostatic transmissions and dash pots. They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated. To reduce deposit formation in equipment where close clearance servo-valves are used. Systems where cold start-up and high operating temperatures are typical. Systems requiring a high degree of load-carrying capability and anti-wear protection. Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

Mobil Delvac 1 LE 5W-30

Vehicle Lube Motor oil

Fully Synthetic Heavy-Duty Diesel Engine Oil

Most important applications of Mobil Delvac 1 LE 5W-30 are:

• + Heavy Duty Diesel Engines including Euro V/VI and US EPA 2007/2010 Modern Low Emissions Vehicles, Utilizing Technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment

Pay attention! Price of Mobil Delvac 1 LE 5W-30 drops automatically with higher volumes.

Mobilube HD-N 80W140

Extra High Performance Commercial Gear Lubricant

Application Mobilube HD-N 80W140

Recommended by ExxonMobil for use in: Heavy duty manual transmissions, axles, and final drives requiring API GL-5 level performance including Scania On-highway light and heavy duty trucks, busses, vans, and cars Off-highway industries including: construction, quarrying, and agriculture Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail Initial fill, top-up, and refill of enclosed commercial-type gearing in manual or semiautomatic transmissions where gear lubricants are recommended including drive axles and final drives of trucks, off-highway equipment, and cars Not recommended for applications requiring API GL-4 level performance Not intended for transmissions for which engine oil or automatic transmission fluids are recommended For limited-slip differential applications, it may be necessary to use a special factory-provided gear lubricant for those requiring ultimate chatter control

Mobilux EP 1

Universally applicable industrial grease EP 1

The most important applications of Mobilux EP 1 are:

• + Mobilux EP 1 are universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 1 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 1 fats are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Please note ! Price Mobilux EP 1 automatically drops with larger quantities.

Mobilux EP 004

Universally applicable industrial grease EP 004

The most important applications of Mobilux EP 004 are:

• + Mobilux EP 004 are universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 004 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 004 fats are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Please note ! Price Mobilux EP 004 automatically drops with larger quantities.

Mobilux EP 3

Universally applicable industrial grease

Mobilux EP 3

The most important applications of Mobilux EP 3 are:

• + Mobilux EP 3 is universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 3 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 3 greases are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Mobil ATF LT 71141

Automatic Transmission Fluid

Application Mobil ATF LT 71141

Mobil ATF LT71141 is designed to meet the specific requirements of automatic transmissions. Mobil ATF LT71141 is used for the AL4 and 4HP20 gear boxes as the automatic transmission fluid.

Mobil Chassis Grease LBZ

Premiumchassis grease

Mobil Chassis Grease LBZ

Premiumchassis grease

Mobilube HD 75W90

Heavy Duty Automotive Gear Lubricants

Application Mobilube HD 75W90

Recommended by ExxonMobil for use in: Heavy duty axles and final drives requiring API GL-5 level performance Passenger cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail

Mobil Zerice S 68

Refrigeration Compressor Lubricants

Application Mobil Zerice S 68

Mobil Zerice S products are recommended for all types of refrigeration compressors: piston compressors as well as rotary screw compressors. They are very suitable for refrigerants based on chlorofluorocarbons and, under certain conditions, also with ammonia in compressors of certain manufacturers. Mobil Zerice S products should not be used with sulphur dioxide and R134A refrigerants. The viscosity grade should be selected according to the recommendations of the compressor manufacturer.

Mobil Centaur XHP 221

Multipurpose Calcium Sulphonate Complex Grease

Application Mobil Centaur XHP 221

Mobil Centaur XHP 221 is recommended for lubrication of rolling element bearings in machinery operating at high temperatures where resistance to water washing and corrosion are important. Specific examples of such applications include : Wet-end paper machine bearings. Heavily loaded industrial ball and roller bearings. Bearings in steel mill and mining operations.

Mobil Grease XHP 221

Grease

Application Mobil Grease XHP 221

Mobilgrease XHP 221 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance.