7 warehouses in Europe
Klüber Unisilkon LCA 3801
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Unisilkon LCA 3801
Special lubricating grease for drinking water valves and non-metallic material combinations
Application Klüber Unisilkon LCA 3801
UNISILKON LCA 3801 is used in the entire sanitary field for the lubrication of all kinds of ceramic disc cartridges (surface pressure >= 0.4 to 4 N/mm²), ceramic head parts, mixing taps, piston and ball mixers. It can also be used as a sealing grease and assembly aid for valves and fittings in domestic and heating installations with exposure to cold and hot water or water vapour.
Performance, Features & Benefits of Klüber Unisilkon LCA 3801:
- For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
- With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
- Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
- Very good resistance to both cold and hot water
- Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
- Good sealing effect and backflow from "lubricant depot"
- Compatible with most ceramics, metals, elastomers and plastics
- Approved acc. to DGW-KTW (UBA guideline), NSF 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Unisilkon LCA 3801
UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach. Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges. UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.
Typical Characteristics
| Product specifications | Method |
Klüber Unisilkon LCA 3801 |
|
| Article number | 022100 | ||
| Chemical composition, type of oil | silicone oil | ||
| Chemical composition, thickener | calcium soap | ||
| Lower service temperature | -40 °C / -40 °F | ||
| Upper service temperature | 140 °C / 284 °F | ||
| Colour space | beige | ||
| Texture | fibrous | ||
| Texture | homogeneous | ||
| Density at | 20 °C | approx. 0.97 g/cm³ | |
| Worked penetration lower limit value | 25 °C | DIN ISO 2137 | 295 x 0.1 mm |
| Worked penetration, upper limit value | 25 °C | DIN ISO 2137 | 325 x 0.1 mm |
| Shear viscosity at shear rate 300 s-1, equipment: rotational viscometer, lower limit valuel | 25 °C | 12 000 mPas | |
| Shear viscosity at shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 25 °C | 20 000 mPas | |
| Kinematic viscosity of the base oil | 25 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 5 000 mm²/s |
| Copper corrosion, lubricating grease, 5h | 100 °C | DIN 51811 | 1 - 100 corrosion degree |
| Water resistance/ rating | 90 °C | DIN 51807 pt. 01, 3 h | 0 - 90 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx |
36 months |
Application notes
UNISILKON LCA 3801 is neutral towards ceramics, metals, thermoplastics (e.g. ABS, PC) as well as elastomers (e.g. NBR, EPDM, VMQ). Owing to the many different compositions of elastomers and plastics, we recommend checking their compatibility prior to series application. UNISILKON LCA 3801 can be easily applied by brush, spatula, sponge or by means of special Apply&Lube technology, e.g. tampon printing. In this context, please also refer to our Safety Data Sheet.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
