7 warehouses in Europe
Klüber Klübersynth HBE 94-401
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübersynth HBE 94-401
Synthetic heavy-duty grease for long-term lubrication
Application KKlüber Klübersynth HBE 94-401
Klübersynth HBE 94-401 can be used for all sealed, highly loaded rolling and plain bearings at high temperatures, e.g. in the steel industry. This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in support rollers in continuous casting installations; conveyor roller bearings in continuous furnaces; support roller bearings in pickling and tin plating; plain bearings of forging presses Due to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.
Performance, Features & Benefits of Klüber Klübersynth HBE 94-401 are:
- Extended component life due to: very good wear protection, excellent corrosion protection, excellent water resistance
- Reduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technology
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth HBE 94-401
As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are your components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too
Typical Characteristics
| Product specifications | Method |
Klüber Klübersynth HBE 94-401 |
|
| Article number | 004295 | ||
| Chemical composition, type of oil | synthetic hydrocarbon oil | ||
| Chemical composition, thickener | calcium complex soap | ||
| Lower service temperature | -35 °C / -31 °F | ||
| Upper service temperature | 160 °C / 320 °F | ||
| Colour space | brown | ||
| Texture | long-fibred | ||
| Texture | homogeneous | ||
| Density | 20°C | approx. 0.93 g/cm³ | |
| Flow pressure of lubricating greases, test temperature: -35 °C | DIN 51805-2 | <= 1 400 mbar | |
| Worked penetration, lower limit value | 25°C | DIN ISO 2137 | 290 x 0.1 mm |
| Worked penetration, upper limit value | 25°C | DIN ISO 2137 | 320 x 0.1 mm |
| Speed factor (n x dm) | approx. 300 000 mm/min | ||
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 4 000 mPas | ||
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 8 000 mPas | ||
| Kinematic viscosity of the base oil | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 400 mm²/s |
| Kinematic viscosity of the base oil | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 40 mm²/s |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree | |
| Oil separation, after 7 d/40 °C | DIN 51817 N | <= 3 % by weight | |
| Drop point | DIN ISO 2176, IP 396 | >= 230 °C | |
| Four-ball tester, welding load | DIN 51350 pt. 04 | >= 2 800 N | |
| Water resistance, 3 h/90 °C, rating | DIN 51807 pt. 01 | 0 - 90 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Klübersynth HBE 94-401 can be applied by means of spatula, grease gun or centralised lubricating systems. Ideally, all lubrication points should be cleaned and old grease be removed prior to the application of Klübersynth HBE 94-401. If the friction points cannot be cleaned for technical reasons, we recommend replacing the existing grease by more frequent relubrication in the initial phase after changeover. For further application-related details, please contact our experts.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
