Klüber Klübersynth G 34-130
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
Klüber Klübersynth G 34-130
Special grease for small gears
Application Klüber Klübersynth G 34-130
For lubrication of gears, bearings, joints and Sliding guides e.g. in home and handicraft machines or generally for small and miniature gears with steel/steel, steel/ Plastic and plastic/plastic material combinations. Klübersynth G 34-130 can be used especially for sliding guides with aluminium material partners can be used. It is furthermore for the lubrication of trapezoidal and Ball screw spindles applicable.
Performance, Features & Benefits of Klüber Klübersynth G 34-130 are:
- Special grease for small gears
- Can be used for aluminium- Material pairings
- Wide used temperature range
- Good wear protection
- Very good protection against tribocorrosion
- Can be conveyed via automatic dosing units
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth G 34-130
Klübersynth G 34-130 is a grease based on a synthetic hydrocarbon oil, mineral oil with a Special calcium soap and polyureas as consistency enhancers. The product is characterized by a wide service temperature range, good wear protection properties and a high resistance to ageing. Klübersynth G 34-130 offers excellent protection against tribocorrosion, has a good adhesion and high water resistance.
Typical Characteristics
| Product specifications : | Klüber Klübersynth G 34-130 | |
| Article number | 020501 | |
| Colour | beige | |
| Texture | homogeneous | |
| density at 20°C | ca. 0,87 g/cm³ | |
| Texture | short | |
| Walk penetration, 25°C, lower limit | DIN ISO 2137 | 355 x 0,1 mm |
| Walk penetration, 25°C, upper limit | DIN ISO 2137 | 385 x 0,1 mm |
| Kinematic viscosity of the base oil, 40°C | DIN 51562 T01/ASTM D-445/ASTM D 7042 | approx. 130 mm²/s |
| Kinematic viscosity of the base oil, 100°C | DIN 51562 T01/ASTM D-445/ASTM D 7042 | approx. 15,5 mm²/s |
| NLGI class, | DIN 51818 | 0 |
| Shear viscosity at 25°C, shear rate 300 s-1, device:rotational viscometer, upper limit | 2 500 mPas | |
| Shear viscosity at 25°C, shear rate 300 s-1, device:rotational viscometer, lower limit | 800 mPas | |
| Drop point, | DIN ISO 2176, IP 396 | >= 180 °C |
| Minimum storage period from production - when stored in dry, frost-free rooms and original Closed containers approx. |
24 Months |
Application notes
For splash lubrication of gears up to approx. 5 m/s circumferential speed as well as for tooth flank greasing up to about 4 m/s. The product can be applied with brush or spatula or via automatic dosing devices can be applied. service temperature range: In general we recommend a service temperature range from about - 30 to 130 °C. Immersion lubrication is possible from approx. - 20 °C possible, the applied lubricating film (e.g. in flank lubrication) is functional down to approx. - 40 °C. Service temperature data are guide values, which are based on the lubricant composition, the intended use and application technology.
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.