7 warehouses in Europe
Klüber ISOFLEX LDS 18 Special A/UV 1 Kg
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber ISOFLEX LDS 18 SPECIAL A/UV
Dynamically light long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A/UV
Tried and tested for rolling and plain bearings running under low temperatures and/or high speeds. For many years, ISOFLEX LDS 18 SPECIAL A/UV has been used in starter motors and seat belt retractors in cars.
Performance, Features & Benefits of Klüber ISOFLEX LDS 18 SPECIAL A/UV are:
- Long service life due to good corrosion protection and resistance to ageing and oxidation enabling cost savings
- Tried and tested over many years, especially at high speeds and low temperatures
- Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber ISOFLEX LDS 18 SPECIAL A/UV
ISOFLEX LDS 18 SPECIAL A/UV is a dynamically light longterm grease for rolling and plain bearings. It is based on mineral oil, ester oil and a lithium soap. Crucial performance characteristics are ageing and oxidation resistance, corrosion protection and good resistance to water. ISOFLEX LDS 18 SPECIAL A/UV contains a UV indicator for reliable lubricant film detection in the event of minimum quantity lubrication.
Typical Characteristics
| Product specifications | Method |
Klüber ISOFLEX LDS 18 SPECIAL A/UV |
|
| Article number | 004176 | ||
| Chemical composition | UV additive | ||
| Chemical composition, thickener | lithium soap | ||
| Chemical composition, type of oil | ester oil | ||
| Chemical composition, type of oil | mineral oil | ||
| Upper service temperature | approx. 120 °C / 248 °F | ||
| Lower service temperature | approx. -50 °C / -58 °F | ||
| Colour space | yellow | ||
| Texture | homogeneous | ||
| Texture | short-fibred | ||
| Density | 20 °C | approx. 0.88 g/cm³ | |
| NLGI grade | DIN 51818 | 2 | |
| Worked penetration, upper limit value | 25 °C | DIN ISO 2137 | 295 x 0.1 mm |
| Worked penetration, lower limit value | 25 °C | DIN ISO 2137 | 265 x 0.1 mm |
| Kinematic viscosity of the base oil | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 15 mm²/s |
| Kinematic viscosity of the base oil | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3.5 mm²/s |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
ISOFLEX LDS 18 SPECIAL A/UV can be applied by brush, spatula, grease gun or grease cartridge. Owing to the many different compositions of elastomers and plastics, we recommend checking their compatibility prior to series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
