7 warehouses in Europe
Klüber HOTEMP 2000 Spray 0.4L
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber HOTEMP 2000 Spray
High-temperature lubricating oil in aerosol form for manual lubrication
Application Klüber HOTEMP 2000 Spray
HOTEMP 2000 Spray is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams. HOTEMP 2000 Spray is also an ideal lubricant for motorcycle chains (also O-ring chains). It is not washed off and penetrates well into chain joints and friction points. HOTEMP 2000 Spray forms a durable, load-carrying lubricant film even at high temperatures. For the ideal service temperature, please refer to the product data.
Performance, Features & Benefits of Klüber HOTEMP 2000 Spray are:
- High thermal stability
- Good adhesion to friction points, long-term lubricating effect
- Good creeping and penetration, hence lower consumption
- Resistant to centrifuging, therefore reduced risk of contamination
- Insoluble in water, good wash-off resistance
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber HOTEMP 2000 Spray
HOTEMP 2000 Spray is an advanced, synthetic hightemperature lubricant in aerosol form for friction points that are normally lubricated manually. Following evaporation of the solvent, HOTEMP 2000 Spray forms an even, thin and highly adhesive lubricant film.
Typical Characteristics
| Product specifications : | Klüber HOTEMP 2000 Spray | |
| Article number | 081133 | |
| Chemical composition, type of oil | synthetic hydrocarbon oil | |
| Chemical composition, type of oil | ester oil | |
| Chemical composition, solvent | hydrocarbon | |
| Lower service temperature | 0 °C / 32 °F | |
| Upper service temperature | 250 °C / 482 °F | |
| Appearance | clear | |
| Colour space | green | |
| Density, 20 °C | DIN 51757 | approx. 0.94 g/cm³ |
| Kinematic viscosity, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 2 000 mm²/s |
| Kinematic viscosity, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 126 mm²/s |
| Flash point, Cleveland, open-cup apparatus | DIN EN ISO 2592 | >= 230 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Ensure sufficient ventilation when processing HOTEMP 2000 Spray as explosive mixtures may form. Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material safety data sheet and on can label. When applied, HOTEMP 2000 Spray forms a highly adhesive lubricant film that resists centrifuging and water wash-off. It is economical in use thanks to its adjustable nozzle. The spray jet can be changed from vertical to horizontal to ensure application of the right quantity at the desired lubrication point. Sprays should not be exposed to direct sunlight and temperatures above 50 °C.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
